In order to access BIOS on a Windows PC, you must press your BIOS key set by your manufacturer which could be F10, F2, F12, F1, or DEL. If your PC goes through its power on self-test startup too quickly, you can also enter BIOS through Windows 10’s advanced start menu recovery settings.
How do I open the BIOS?
Get ready to act quickly: You need to start the computer and press a key on the keyboard before the BIOS hands over control to Windows. You have only a few seconds to perform this step. On this PC, you’d press F2 to enter the BIOS setup menu. If you don’t catch it the first time, simply try again.
How do I open BIOS on Windows 10?
How to enter the BIOS on a Windows 10 PC
- Navigate to Settings. You can get there by clicking the gear icon on the Start menu. …
- Select Update & Security. …
- Select Recovery from the left menu. …
- Click Restart Now under Advanced startup. …
- Click Troubleshoot.
- Click Advanced options.
- Select UEFI Firmware Settings. …
- Click Restart.
How do I get into BIOS if UEFI is missing?
Type msinfo32 and press Enter to open the System Information screen. Select System Summary on the left-hand side pane. Scroll down on the right-hand side pane and look for the BIOS Mode option. Its value should either be UEFI or Legacy.
How can I enter BIOS if F2 key is not working?
If the F2 prompt doesn’t appear on the screen, you might not know when you should press the F2 key.
…
- Go to Advanced > Boot > Boot Configuration.
- In the Boot Display Config pane: Enable POST Function Hotkeys Displayed. Enable Display F2 to Enter Setup.
- Press F10 to save and exit BIOS.
How do I change BIOS settings?
How Do I Completely Change the BIOS on My Computer?
- Restart your computer and look for the keys–or combination of keys–you must press to access your computer’s setup, or BIOS. …
- Press the key or combination of keys to access your computer’s BIOS.
- Use the “Main” tab to change the system date and time.
How do I find my BIOS time and date Windows 10?
To see it, first launch Task Manager from the Start menu or the Ctrl+Shift+Esc keyboard shortcut. Next, click the “Startup” tab. You’ll see your “last BIOS time” in the top-right of the interface. The time is displayed in seconds and will vary between systems.
How do I fix BIOS not booting?
If you cannot enter the BIOS setup during boot, follow these steps to clear the CMOS:
- Turn off all peripheral devices connected to the computer.
- Disconnect the power cord from the AC power source.
- Remove the computer cover.
- Find the battery on the board. …
- Wait one hour, then reconnect the battery.
How do I boot into BIOS without rebooting?
How to enter BIOS without restart the computer
- Click >Start.
- Go to Section >Settings.
- Find and open >Update & Security.
- Open the menu >Recovery.
- In the Advance startup section, select >Restart now. …
- In recovery mode, select and open >Troubleshoot.
- Select >Advance option. …
- Find and select >UEFI Firmware Settings.
How do I force BIOS to boot from USB?
Boot from USB: Windows
- Press the Power button for your computer.
- During the initial startup screen, press ESC, F1, F2, F8 or F10. …
- When you choose to enter BIOS Setup, the setup utility page will appear.
- Using the arrow keys on your keyboard, select the BOOT tab. …
- Move USB to be first in the boot sequence.