The simplest way to remove a BIOS password is to simply remove the CMOS battery. A computer will remember its settings and keep the time even when it is turned off and unplugged because these parts are powered by a small battery inside the computer called a CMOS battery. … Some computers have this part standing upright.
How do you bypass a BIOS password on a laptop?
Turn off the computer and disconnect the power cable from the computer. Locate the password reset jumper (PSWD) on the system board. Remove the jumper plug from the password jumper-pins. Power on without the jumper plug to clear the password.
Is BIOS password protected?
A Windows user account password doesn’t protect your files. … A BIOS or UEFI firmware password provides some protection against this. Depending on how you configure the password, people will need the password to boot the computer or just to change BIOS settings.
How do I find my BIOS password?
If you have forgotten the BIOS password, check with the motherboard manufacturer (or your computer dealer) to see whether a backdoor password is available. For example, the Phoenix-brand motherboard has the backdoor password PHOENIX, which you can type at the BIOS password prompt to gain access to the computer.
How do I reset my UEFI BIOS password?
Follow these steps:
- Enter the wrong password multiple times when prompted by the BIOS. …
- Post this, a new number or code on the screen. …
- Open the BIOS password website, and enter the XXXXX code in it. …
- It will then offer multiple unlock keys, which you can try to clear out the BIOS / UEFI lock on your Windows computer.
How do I use a BIOS password?
Instructions
- To get in the BIOS setup, boot the computer and press F2 (The option comes up on the upper left hand conner of the screen)
- Highlight System Security then press Enter.
- Highlight System Password then press Enter and put in the password. …
- System Password will change from “not enabled” to “enabled”.
How do I disable BIOS?
Navigate to the Advanced settings menu by pressing the left and right arrow keys. Use the up and down arrow keys to highlight the settings for Shadowing and RAM Cacheable. Press Enter after highlighting both entries and select the Disabled option. Press Esc then press Y to exit and save changes.