Press the F10 key to exit the BIOS setup utility. In the Setup Confirmation dialog box, press the ENTER key to save the changes and exit.
How do I get out of utility mode in BIOS?
webworkings
- In the Aptio Setup Utility, select the “boot” menu and then select “Launch CSM” and change it to “enable”.
- Next select the “Security” menu and then select “secure Boot Control” and change to “disable”.
- Now select “Save & Exit” and press “yes”.
19 сент. 2019 г.
Why can’t I exit BIOS?
If you can’t exit BIOS on your PC, the issue is most likely caused by your BIOS settings. … Enter BIOS, go to Security Options and disable Secure Boot. Now save changes and restart your PC. Enter BIOS again and this time go to Boot section.
How do I turn off UEFI setup utility?
The Fn keys can be used to issue commands to the UEFI (BIOS). Try pressing F1 and see if it brings up a list of Fn associated commands. Look for “Quit Without Saving Changes”, and press that Fn key. That should get you out of the UEFI and force a re-boot.
How do I save and exit BIOS?
Press the <F1> key to open the General Help screen. F4 The <F4> key allows you to save any changes you have made and exit BIOS Setup. Press the <F4> key to save your changes. Press the <Enter> key to save the configuration and exit.
What is a BIOS utility?
The BIOS Setup utility reports system information and can be used to configure the server BIOS settings. BIOS has a Setup utility stored in the BIOS flash memory. The configured data is provided with context-sensitive Help and is stored in the system’s battery-backed CMOS RAM.
How do I reinstall Windows 10 from BIOS?
Save your settings, reboot your computer and you should now be able to install Windows 10.
- Step 1 – Enter your computer’s BIOS. …
- Step 2 – Set your computer to boot from DVD or USB. …
- Step 3 – Choose the Windows 10 clean install option. …
- Step 4 – How to find your Windows 10 license key. …
- Step 5 – Select your hard disk or SSD.
1 мар. 2017 г.
How do I fix a stuck BIOS?
What to Do if PC is Stuck on BIOS Screen
- Restore Default Settings of BIOS. First, you need to access BIOS settings before your reset it. …
- Clear the CMOS (BIOS) …
- Use UEFI Boot and Check Your Boot Order. …
- Repairing Your Computer Using the Help of Windows 10 Bootable Media.
How do I fix BIOS boot loop?
Unplug power cable from PSU. Press the power button for 20 seconds. Remove the CMOS battery and wait 5 minutes and insert CMOS battery back. Make sure to connect only the disk where Windows was installed…if you installed Windows while having only one disk on your PC.
How do I reset my BIOS to default?
Reset the BIOS to Default Settings (BIOS)
- Access the BIOS Setup utility. See Accessing BIOS.
- Press the F9 key to automatically load the factory default settings. …
- Confirm the changes by highlighting OK, then press Enter. …
- To save the changes and exit the BIOS Setup utility, press the F10 key.
How do I get out of UEFI boot mode?
How do I disable UEFI Secure Boot?
- Hold down the Shift key and click Restart.
- Click Troubleshoot → Advanced options → Start-up Settings → Restart.
- Tap the F10 key repeatedly (BIOS setup), before the “Startup Menu” opens.
- Go to Boot Manager and disable the option Secure Boot.
How do I adjust BIOS settings?
How to Configure the BIOS Using the BIOS Setup Utility
- Enter the BIOS Setup Utility by pressing the F2 key while the system is performing the power-on self-test (POST). …
- Use the following keyboard keys to navigate the BIOS Setup Utility: …
- Navigate to the item to be modified. …
- Press Enter to select the item. …
- Use the up or down arrow keys or the + or – keys to change a field.
What is UEFI setup utility?
UEFI is essentially a tiny operating system that runs on top of the PC’s firmware, and it can do a lot more than a BIOS. It may be stored in flash memory on the motherboard, or it may be loaded from a hard drive or network share at boot.
How do I save my BIOS?
To save changes, locate the Save Changes and Reset option on the Save & Exit screen. This option saves your changes then resets your computer. There’s also a Discard Changes and Exit option. This is for if you make a mistake or decide you don’t want to change your BIOS settings at all.
How do I boot into BIOS?
To access your BIOS, you’ll need to press a key during the boot-up process. This key is often displayed during the boot process with a message “Press F2 to access BIOS”, “Press <DEL> to enter setup”, or something similar. Common keys you may need to press include Delete, F1, F2, and Escape.
Why does my PC keep going into BIOS?
If your computer keeps booting to BIOS, the issue may be triggered by the incorrect boot order. … If you find it, set the disk as the primary boot option. If your hard drive listed under boot device cannot be found in BIOS, change this hard disk. Check if the disk is plugged in correctly and can work on another PC.