For QLogic or Emulex adapters, you can find the WWPN in the /proc/scsi/ adapter_type / n directory, where adapter_type is the host adapter type and n is the host adapter number for your card.
How do I find my WWN number in Linux?
How to find WWN number of HBA and scan the FC Luns in LINUX
- Identify the number of HBA adapters.
- To get the WWNN (World Wide Node Number) of HBA or FC card in Linux.
- To get the WWPN (World Wide Port Number) of HBA or FC card in Linux.
- Scan the newly added or rescan the existing LUNs in Linux.
How do I find HBA details in Linux?
Re: HOW TO FIND HBA DETAILS IN LINUX
You probably will find your HBA module in /etc/modprobe. conf. There you can identify with “modinfo” if the module is for QLOGIC or EMULEX. Then use SanSurfer (qlogic) or HBA Anywhere (emulex) to obtain detailed and accurate information.
How do I know my HBA card number in Linux?
Check HBA card and its driver’s info in linux(RHEL6)
- To check if the host has HBA card installed and which type of card installed, physiical slot, driver, module information. # lspci | grep -i fibre. …
- check if the driver/module loaded in kernel. …
- check author,description,mdule file name, license, driver version.
What is Wwpn number?
In computing, a World Wide Port Name, WWPN, or WWpN, is a World Wide Name assigned to a port in a Fibre Channel fabric. Used on storage area networks, it performs a function equivalent to the MAC address in Ethernet protocol, as it is supposed to be a unique identifier in the network.
How do I find my WWN number?
Finding a WWN on a Windows host
- Verify that the Fibre Channel adapters and device drivers are installed.
- Log on to the Windows host with administrator access.
- Go to the LightPulse Utility to open the LightPulse Utility window. …
- On the LightPulse Utility window, verify that any installed adapters appear in the tree.
How do I find my WWN Datastore number?
2. How to find HBA WWN via ESXi Shell / CLI:
- Connect to ESXi shell either via putty/SSH or DCUI (Direct Console User Interface) / server console.
- Run ‘ls /proc/scsi/’ and check the folder names: …
- Look for a folder like ‘qla2xxx’ – QLogic HBA, ‘lpfc820’ – Emulex HBA, ‘bnx2i” – Brocade HBA;
- Run ‘ls /proc/scsi/qla2xxx’.
What is Lspci in Linux?
lspci command is a utility on linux systems used to find out information about the PCI busses and devices connected to the PCI subsystem. … The first part ls, is the standard utility used on linux for listing information about the files in the filesystem.
What is WWN number?
A World Wide Name (WWN) or World Wide Identifier (WWID) is a unique identifier used in storage technologies including Fibre Channel, Parallel ATA, Serial ATA, NVM Express, SCSI and Serial Attached SCSI (SAS).
How can I check my HBA card details?
Check HBA card and its driver’s info in linux(RHEL6)
- To check if the host has HBA card installed and which type of card installed, physiical slot, driver, module information. # lspci | grep -i fibre. …
- check if the driver/module loaded in kernel. …
- check author,description,mdule file name, license, driver version.
How can I check my HBA status?
Instructions
- #lspci -vvv | grep -I HBA. We can see following entries in the output 03:00.1 Fibre Channel: QLogic Corp. ISP2432-based 4Gb Fibre Channel to PCI Express HBA (rev 03) …
- #systool -v. Or. To check WWNN , run the following command.
- #cat /sys/class/fc_host/hostN/node_name. To check port state, run.