Please keep tapping the Esc key gently several times as soon as you power on the computer. It takes you to the startup menu. Then press the F10 key to go the bios. Then press F9 load setup defaults and select yes and push “enter.”
How do I get to Dell advanced BIOS settings?
Power on the system. Tap the F2 key to enter System Setup when the Dell logo appears. If you have trouble entering Setup using this method, press F2 when the keyboard LEDs first flash. Try not to hold down the F2 key as this can sometimes be interpreted as a stuck key by the system.
How do I access hidden BIOS settings?
Press the “Enter” key on your computer to access the BIOS feature.
- Unlock the secret features of the computer’s BIOS by pressing the “Alt” and “F1” button at the same time.
- Press the “Enter” key on your computer to access the BIOS feature.
How do I check my BIOS settings?
Method 2: Use Windows 10’s Advanced Start Menu
- Navigate to Settings.
- Click Update & Security.
- Select Recovery in the left pane.
- Click Restart now under the Advanced startup header. Your computer will reboot.
- Click Troubleshoot.
- Click Advanced options.
- Click UEFI Firmware Settings.
- Click Restart to confirm.
What is my BIOS key?
To access your BIOS, you’ll need to press a key during the boot-up process. This key is often displayed during the boot process with a message “Press F2 to access BIOS”, “Press <DEL> to enter setup”, or something similar. Common keys you may need to press include Delete, F1, F2, and Escape.
How do I change BIOS settings?
How to enter the BIOS on a Windows 10 PC
- Navigate to Settings. You can get there by clicking the gear icon on the Start menu. …
- Select Update & Security. …
- Select Recovery from the left menu. …
- Click Restart Now under Advanced startup. …
- Click Troubleshoot.
- Click Advanced options.
- Select UEFI Firmware Settings. …
- Click Restart.
What is UEFI mode?
The Unified Extensible Firmware Interface (UEFI) is a publicly available specification that defines a software interface between an operating system and platform firmware. … UEFI can support remote diagnostics and repair of computers, even with no operating system installed.
How do I access UEFI settings?
How to access UEFI (BIOS) using Settings
- Open Settings.
- Click on Update & Security.
- Click on Recovery.
- Under the “Advanced startup” section, click the Restart now button. Source: Windows Central.
- Click on Troubleshoot. …
- Click on Advanced options. …
- Click the UEFI Firmware settings option. …
- Click the Restart button.
What happens if I reset my BIOS to default?
A BIOS reset will erase BIOS settings and return them to the factory defaults. These settings are stored in non-volatile memory on the system board. This will not erase data on the system drives.
How do I enter Supervisor mode in BIOS?
To unlock the BIOS, power off your laptop or system, then switch it on again. Press F1 when you see the message about pressing the Access IBM button, and enter the Supervisor password, followed by the Power On password, if they are different.
How do I boot into BIOS?
To boot to UEFI or BIOS:
- Boot the PC, and press the manufacturer’s key to open the menus. Common keys used: Esc, Delete, F1, F2, F10, F11, or F12. …
- Or, if Windows is already installed, from either the Sign on screen or the Start menu, select Power ( ) > hold Shift while selecting Restart.
How do I know if my BIOS is disabled?
If you have Windows 10 or Windows 8 operating system, the easiest way to check is by opening up Task Manager->Performance Tab. You should see Virtualization as shown in the below screenshot. If it is enabled, it means that your CPU supports Virtualization and is currently enabled in BIOS.