If you can’t exit BIOS on your PC, the issue is most likely caused by your BIOS settings. … Enter BIOS, go to Security Options and disable Secure Boot. Now save changes and restart your PC. Enter BIOS again and this time go to Boot section.
How do I force quit BIOS?
Press the F10 key to exit the BIOS setup utility. In the Setup Confirmation dialog box, press the ENTER key to save the changes and exit.
How do I fix a computer stuck in BIOS?
Go to the BIOS settings of the computer that’s stuck on the BIOS screen. Change the boot order to let the computer from a USB drive or CD/DVD. Insert the DVD/CD into the problematic PC or plug in the bootable USB into it. Reboot your faulty computer; you will now be able to gain access.
Why does my computer keep going into BIOS?
Instead of getting to the Windows loading screen, the PC boots directly into the BIOS. This unusual behavior could be triggered by different causes: recently changed/added hardware, hardware damage, improper hardware connections, and other issues.
How do I adjust BIOS settings?
How to Configure the BIOS Using the BIOS Setup Utility
- Enter the BIOS Setup Utility by pressing the F2 key while the system is performing the power-on self-test (POST). …
- Use the following keyboard keys to navigate the BIOS Setup Utility: …
- Navigate to the item to be modified. …
- Press Enter to select the item.
How do I bypass BIOS on startup?
Access the BIOS and look for anything that refers to turning on, on/off, or showing the splash screen (the wording differs by BIOS version). Set the option to disabled or enabled, whichever is opposite of how it is currently set. When set to disabled, the screen no longer appears.
Why is my computer stuck booting up?
Software glitches, faulty hardware or removable media connected to your computer can sometimes cause the computer to hang and become unresponsive during the startup process. You can use a selection of troubleshooting techniques to fix the problem and get your computer starting normally.
What to do if computer is not booting?
Whatever your issue, here are some troubleshooting steps to take when your computer won’t boot correctly.
- Give ‘er More Power. …
- Check Your Monitor. …
- Listen for the Message at the Beep. …
- Unplug Unnecessary USB Devices. …
- Reseat the Hardware Inside. …
- Explore the BIOS. …
- Scan for Viruses Using a Live CD. …
- Boot Into Safe Mode.
Can you fix a corrupted BIOS?
A corrupted motherboard BIOS can occur for various reasons. The most common reason why it happens is due to a failed flash if a BIOS update was interrupted. … After you are able to boot into your operating system, you can then fix the corrupted BIOS by using the “Hot Flash” method.
How do I reset my BIOS to default?
Reset the BIOS to Default Settings (BIOS)
- Access the BIOS Setup utility. See Accessing BIOS.
- Press the F9 key to automatically load the factory default settings. …
- Confirm the changes by highlighting OK, then press Enter. …
- To save the changes and exit the BIOS Setup utility, press the F10 key.
How do I boot directly into BIOS?
In order to access BIOS on a Windows PC, you must press your BIOS key set by your manufacturer which could be F10, F2, F12, F1, or DEL. If your PC goes through its power on self-test startup too quickly, you can also enter BIOS through Windows 10’s advanced start menu recovery settings.