During startup, hold F2 to enter the BIOS Setup screen. Check whether your hard drive is listed under Bootable Device. If your hard drive isn’t listed, this indicates that there are no bootable system files on the hard drive.
How do I enable my hard drive in BIOS?
Restart PC and press F2 to enter BIOS; Enter Setup and check system documentation to see whether the not detected hard drive is turned Off in System Setup or not; If it’s Off, turn it ON in System Setup. Reboot PC to check out and find your hard drive now.
How do I know if my hard drive is connected?
If you’re running Windows 10 or Windows 8, you can view all mounted drives in File Explorer. You can open File Explorer by pressing Windows key + E . In the left pane, select This PC, and all drives are shown on the right. The screenshot shows a typical view of This PC, with three mounted drives.
Is BIOS related to hard drive?
The BIOS software has a number of different roles, but its most important role is to load the operating system. … It cannot get it from the operating system because the operating system is located on a hard disk, and the microprocessor cannot get to it without some instructions that tell it how.
Why isn’t my hard drive showing up in my BIOS?
The BIOS will not detect a hard disk if the data cable is damaged or the connection is incorrect. Serial ATA cables, in particular, can sometimes fall out of their connection. Be sure to check your SATA cables are tightly connected to the SATA port connection.
How do I fix BIOS not detecting hard drive?
Check if the hard drive is disabled in the BIOS
- Restart PC and enter system setup (BIOS) by pressing F2.
- Check and switch on hard drive detection in system configurations.
- Enable the auto-detection for future purpose.
- Reboot and check if the drive is detectable in BIOS.
What is ST1000LM035 1RK172?
Seagate Mobile ST1000LM035 1TB / 1000GB 2.5″ 6Gbps 5400 RPM 512e Serial ATA Hard Disk Drive – Brand New. Seagate Product Number: 1RK172-566. Mobile HDD. Thin size. Huge storage.
Why can’t I see my drives in my computer?
Your USB disk may be corrupted, to check for a corrupted disk, plug the disk into another computer to see if the disk is seen in Windows Explorer on that computer. Make sure that you have the driver installed. If the device is still not seen in Windows Explorer on the alternate computer, the disk may be corrupted.
How do you fix a hard drive that won’t read?
What to Do When Your External Hard Drive Won’t Show Up
- Make Sure It’s Plugged In and Powered On. Western Digital My Book. …
- Try Another USB Port (or Another PC) …
- Update Your Drivers. …
- Enable and Format the Drive in Disk Management. …
- Clean the Disk and Start From Scratch. …
- Remove and Test the Bare Drive.
Do I need to change BIOS settings for SSD?
For ordinary, SATA SSD, that’s all you need to do in BIOS. Just one advice not tied to SSDs only. Leave SSD as first BOOT device, just change to CD using fast BOOT choice (check your MB manual which F button is for that) so you don’t have to enter BIOS again after first part of windows installation and first reboot.
How do I wipe my hard drive from BIOS?
How to use Disk Sanitizer or Secure Erase
- Turn on or restart the computer.
- While the display is blank, press the F10 key repeatedly to enter the BIOS settings menu. …
- Select Security.
- Select Hard Drive Utilities or Hard Drive Tools.
- Select Secure Erase or Disk Sanitizer to open the tool.
How do I fix a corrupted hard drive?
Steps to Repair Corrupted Hard Disk without Formatting
- Step 1: Run Antivirus Scan. Connect the hard drive to a Windows PC and use a reliable antivirus/malware tool to scan the drive or the system. …
- Step 2: Run CHKDSK Scan. …
- Step 3: Run SFC Scan. …
- Step 4: Use a Data Recovery Tool.