Resetting your BIOS restores it to the last saved configuration, so the procedure can also be used to revert your system after making other changes.
Does resetting the BIOS erase data?
Resetting the bios shouldn’t have any effect or damage your computer in any way. All it does is reset everything to it’s default. As for your old CPU being frequency locked to what your old one was, it could be settings, or it could also be a CPU which is not (fully) supported by your current bios.
Does factory reset affect BIOS?
Resetting windows will not affect the BIOS. I did this all the time when reinstalling Windows, and the BIOS is completely unaffected. Just make sure your boot order is set to the drive with windows installed. Be sure to backup your data before resetting though!
How do I reset my BIOS back to default?
Reset the BIOS to Default Settings (BIOS)
- Access the BIOS Setup utility. See Accessing BIOS.
- Press the F9 key to automatically load the factory default settings. …
- Confirm the changes by highlighting OK, then press Enter. …
- To save the changes and exit the BIOS Setup utility, press the F10 key.
Is it safe to reset CMOS?
Clearing the CMOS should always be performed for a reason – such as troubleshooting a computer problem or clearing a forgotten BIOS password. There’s no reason to clear your CMOS if everything is working properly.
How do I enter BIOS?
In order to access BIOS on a Windows PC, you must press your BIOS key set by your manufacturer which could be F10, F2, F12, F1, or DEL. If your PC goes through its power on self-test startup too quickly, you can also enter BIOS through Windows 10’s advanced start menu recovery settings.
How can I reset my laptop BIOS without display?
Easy way to do this, which will work regardless of what motherboard you have, flip the switch on your power supply to off(0) and remove the silver button battery on the motherboard for 30 seconds, put it back in, turn the power supply back on, and boot up, it should reset you to factory defaults.
What is a BIOS rollback?
Downgrading your computer’s BIOS can break features that are included with later BIOS versions. Intel recommends you only downgrade the BIOS to a previous version for one of these reasons: You recently updated the BIOS and now have problems with the board (system won’t boot, features no longer work, etc.).
What key will you press to enter BIOS?
In order to access BIOS on a Windows PC, you must press your BIOS key set by your manufacturer which could be F10, F2, F12, F1, or DEL. If your PC goes through its power on self-test startup too quickly, you can also enter BIOS through Windows 10’s advanced start menu recovery settings.
How do I resolve a BIOS problem?
Fixing 0x7B Errors at Startup
- Shut down the computer and restart it.
- Start the BIOS or UEFI firmware setup program.
- Change the SATA setting to the correct value.
- Save settings and restart the computer.
- Select Start Windows Normally if prompted.
How do I change BIOS settings?
How to enter the BIOS on a Windows 10 PC
- Navigate to Settings. You can get there by clicking the gear icon on the Start menu. …
- Select Update & Security. …
- Select Recovery from the left menu. …
- Click Restart Now under Advanced startup. …
- Click Troubleshoot.
- Click Advanced options.
- Select UEFI Firmware Settings. …
- Click Restart.
How do I reset my BIOS battery?
To reset the BIOS by replacing the CMOS battery, follow these steps instead:
- Shutdown your computer.
- Remove the power cord to make sure that your computer receives no power.
- Make sure you’re grounded. …
- Find the battery on your motherboard.
- Remove it. …
- Wait 5 to 10 minutes.
- Put the battery back in.
- Power on your computer.