Why does my computer keep going into BIOS?

Windows 10 users reported an issue when booting their computers. Instead of getting to the Windows loading screen, the PC boots directly into the BIOS. This unusual behavior could be triggered by different causes: recently changed/added hardware, hardware damage, improper hardware connections, and other issues.

Why does my computer boot to BIOS every time?

A change to BIOS settings may sometimes cause the PC to have problems with the boot. If this is the cause, then simply resetting it to default settings might solve the problem. Thus, changing BIOS settings back to default/factory version might fix this in some cases.

How do I get out of BIOS loop?

Unplug power cable from PSU. Press the power button for 20 seconds. Remove the CMOS battery and wait 5 minutes and insert CMOS battery back. Make sure to connect only the disk where Windows was installed…if you installed Windows while having only one disk on your PC.

How do I boot into Windows instead of BIOS?

To boot to UEFI or BIOS:

  1. Boot the PC, and press the manufacturer’s key to open the menus. Common keys used: Esc, Delete, F1, F2, F10, F11, or F12. …
  2. Or, if Windows is already installed, from either the Sign on screen or the Start menu, select Power ( ) > hold Shift while selecting Restart.

How do I boot directly into BIOS?

In order to access BIOS on a Windows PC, you must press your BIOS key set by your manufacturer which could be F10, F2, F12, F1, or DEL. If your PC goes through its power on self-test startup too quickly, you can also enter BIOS through Windows 10’s advanced start menu recovery settings.

How do I enter BIOS?

In order to access BIOS on a Windows PC, you must press your BIOS key set by your manufacturer which could be F10, F2, F12, F1, or DEL. If your PC goes through its power on self-test startup too quickly, you can also enter BIOS through Windows 10’s advanced start menu recovery settings.

How do I fix the endless reboot loop in Windows 10?

Using the WinX Menu of Windows 10, open System. Next click on Advanced system settings > Advanced tab > Startup and Recovery > Settings. Uncheck the Automatically restart box. Click Apply / OK and Exit.

How do I disable BIOS at startup?

Access the BIOS and look for anything that refers to turning on, on/off, or showing the splash screen (the wording differs by BIOS version). Set the option to disabled or enabled, whichever is opposite of how it is currently set. When set to disabled, the screen no longer appears.

How do I reset my BIOS to default?

Reset the BIOS to Default Settings (BIOS)

  1. Access the BIOS Setup utility. See Accessing BIOS.
  2. Press the F9 key to automatically load the factory default settings. …
  3. Confirm the changes by highlighting OK, then press Enter. …
  4. To save the changes and exit the BIOS Setup utility, press the F10 key.

How do I enter BIOS on Windows 10?

To enter BIOS from Windows 10

  1. Click –> Settings or click New notifications. …
  2. Click Update & security.
  3. Click Recovery, then Restart now.
  4. The Options menu will be seen after executing the above procedures. …
  5. Select Advanced options.
  6. Click UEFI Firmware Settings.
  7. Choose Restart.
  8. This displays the BIOS setup utility interface.

How do I get into the BIOS in Windows 10?

How to enter the BIOS on a Windows 10 PC

  1. Navigate to Settings. You can get there by clicking the gear icon on the Start menu. …
  2. Select Update & Security. …
  3. Select Recovery from the left menu. …
  4. Click Restart Now under Advanced startup. …
  5. Click Troubleshoot.
  6. Click Advanced options.
  7. Select UEFI Firmware Settings. …
  8. Click Restart.

How do I install Windows 10 from BIOS?

After booting into BIOS, use the arrow key to navigate to the “Boot ” tab. Under “Boot mode select”, select UEFI (Windows 10 is supported by UEFI mode.) Press the “F10 ” key F10 to save the configuration of the settings before exiting (The computer will restart automatically after existing).

Like this post? Please share to your friends:
OS Today