What is HDD password in BIOS?

Whereas an operating system password controls whether you can log in after you’ve booted the computer and a BIOS password controls whether you can boot the computer at all, a hard disk password controls access to the hard disk itself. When you boot your computer, you’ll need to enter the hard disk password.

How do I find my HDD in BIOS?

During startup, hold F2 to enter the BIOS Setup screen. Under Disk Information, you can view all the hard drives installed on your computer.

Is it possible to remove HDD password?

Click the “Hard Disk Password,” “Hard Drive Password,” “HDD Password” or other similar option and then click the “Change Password” or “Remove Password” option. Enter the current hard drive password when prompted to do so.

What is the password in BIOS?

A BIOS password is authentication information that is sometimes required to log into a computer’s basic input/output system (BIOS) before the machine will boot up. … These are passwords created by the BIOS manufacturer that will work no matter what password the user has set up.

Why is my HDD not being detected?

The BIOS will not detect a hard disk if the data cable is damaged or the connection is incorrect. Serial ATA cables, in particular, can sometimes fall out of their connection. … The easiest way to test a cable is to replace it with another cable. If the problem persists, then the cable was not the cause of the problem.

How do I fix SATA ports not present?

Quick Fix 1. Connect ATA/SATA Hard Drive with Another Cable Port

  1. Reconnect the hard drive with the data cable port or connect ATA/SATA hard drive to another new data cable in PC;
  2. Connect the hard drive with another desktop/laptop as a second HDD;

How do I change my HDD password?

Change your password

  1. Open your Google Account. You might need to sign in.
  2. Under “Security,” select Signing in to Google.
  3. Choose Password. You might need to sign in again.
  4. Enter your new password, then select Change Password.

How do I access a hard drive without a password?

As others have mentioned you can try using a sata -usb adapter or disk caddy connected to another computer to access the data. If the drive has been encrypted with Bit-Locker you will need the recovery key. You can also try booting the laptop with a Linux live cd & then try moving the data to another storage device.

How do you unlock a locked hard drive?

When your computer hard drive gets locked, you may try the following steps to unlock it:

  1. Run a disk check using CHKDSK command.
  2. Run a system file check with sfc /scannow command.
  3. Complete a startup repair with “bootrec /RebuildBcd”, “bootrec /fixMbr”, and “bootrec /fixboot” commands.
  4. Try a system restore.

How do I reset my BIOS administrator password?

On the computer motherboard, locate the BIOS clear or password jumper or DIP switch and change its position. This jumper is often labeled CLEAR, CLEAR CMOS, JCMOS1, CLR, CLRPWD, PASSWD, PASSWORD, PSWD or PWD. To clear, remove the jumper from the two pins currently covered, and place it over the two remaining jumpers.

How do I create a BIOS password?

Only logging with the password can you enter into the operating system. Create a BIOS password. Restart the laptop, and press F2 continuously to the following interface. Select the security with the cursor and choose “Set User” password or “Set User Password”.

How do you fix HDD Cannot detect?

Two Quick Fixes for Hard Disk Not Detected in BIOS

  1. Shut down your PC at first.
  2. Open your computer cases and remove all the screws with a screwdriver.
  3. Unplug the hard drive which fails to be recognized by Windows BIOS, and remove the ATA or SATA cable and its power cable.

How do I fix no hard drive detected?

Step 1 – Make sure the SATA cable or USB cable is tightly connected to the internal or external drive and SATA port or the USB port on the computer. Step 2 -If that doesn’t work, try another SATA or USB port on the computer’s motherboard. Step 3 – Try connecting the internal or external drive to another computer.

How do I know if my SATA port is bad?

Bad Sata Port (or Cable) Symptoms

  1. Occasional blue screen of death (BSOD) crashes.
  2. Random long freezes – sometimes followed by an automatic shut down and restart.
Like this post? Please share to your friends:
OS Today