Resetting your BIOS restores it to the last saved configuration, so the procedure can also be used to revert your system after making other changes. Whatever situation you may be dealing with, remember that resetting your BIOS is a simple procedure for new and experienced users alike.
Does resetting the BIOS erase data?
Resetting the bios shouldn’t have any effect or damage your computer in any way. All it does is reset everything to it’s default. As for your old CPU being frequency locked to what your old one was, it could be settings, or it could also be a CPU which is not (fully) supported by your current bios.
What will happen if I reset my BIOS?
Most often, resetting the BIOS will reset the BIOS to the last saved configuration, or resets your BIOS to the BIOS version that shipped with the PC. Sometimes the latter can cause issues if settings were changed to take account for changes in hardware or OS after install.
Is clearing CMOS safe?
Clearing the CMOS should always be performed for a reason – such as troubleshooting a computer problem or clearing a forgotten BIOS password. There’s no reason to clear your CMOS if everything is working properly.
Can you factory reset a laptop from BIOS?
Use the arrow keys to navigate through the BIOS menu to find the option to reset the computer to its default, fall-back or factory settings. On an HP computer, select the “File” menu, and then select “Apply Defaults and Exit”.
How do I reset my BIOS without a monitor?
Champion. Easy way to do this, which will work regardless of what motherboard you have, flip the switch on your power supply to off(0) and remove the silver button battery on the motherboard for 30 seconds, put it back in, turn the power supply back on, and boot up, it should reset you to factory defaults.
How do I reset my BIOS to default?
Reset the BIOS to Default Settings (BIOS)
- Access the BIOS Setup utility. See Accessing BIOS.
- Press the F9 key to automatically load the factory default settings. …
- Confirm the changes by highlighting OK, then press Enter. …
- To save the changes and exit the BIOS Setup utility, press the F10 key.
How do I reset my BIOS settings?
[Motherboards] How can I restore BIOS settings?
- Press Power to turn on the motherboard.
- During POST, Press <Del> key to enter the BIOS.
- Go to Exit Tab.
- Select Load Optimized Defaults.
- Press Enter to default settings.
Will clearing CMOS delete my files?
It returns BIOS settings to default values. This has nothing to do with pictures or any saved programs or files.
What to do after clearing CMOS?
Try disconnecting the hard drive, and power on the system. If it stalls at a BIOS message saying, ‘boot failure, insert system disk and press enter,’ then your RAM is likely fine, as it’s successfully POSTed. If that’s the case, concentrate on the hard drive. Try doing a windows repair with your OS disc.
Can you clear CMOS with screwdriver?
If there is a [CMOS_SW] button on motherboard, just press this button to clear CMOS. If there is a CLR_CMOS (Clearing CMOS Jumper) jumper on the motherboard, you may place a jumper cap to temporarily short the two pins or use a metal object like a screwdriver to touch the two pins for a few seconds.