Quick Answer: How do I access my CPU BIOS?

Contents

In order to access BIOS on a Windows PC, you must press your BIOS key set by your manufacturer which could be F10, F2, F12, F1, or DEL. If your PC goes through its power on self-test startup too quickly, you can also enter BIOS through Windows 10’s advanced start menu recovery settings.

How do I enter BIOS on Windows 10?

To enter BIOS from Windows 10

Click –> Settings or click New notifications. …
Click Update & security.
Click Recovery, then Restart now.
The Options menu will be seen after executing the above procedures. …
Select Advanced options.
Click UEFI Firmware Settings.
Choose Restart.
This displays the BIOS setup utility interface.

How do I force my computer into BIOS?

To boot to UEFI or BIOS:

Boot the PC, and press the manufacturer’s key to open the menus. Common keys used: Esc, Delete, F1, F2, F10, F11, or F12. …
Or, if Windows is already installed, from either the Sign on screen or the Start menu, select Power ( ) > hold Shift while selecting Restart.

How can I enter BIOS if F2 key is not working?

If the F2 prompt doesn’t appear on the screen, you might not know when you should press the F2 key.
…

Go to Advanced > Boot > Boot Configuration.
In the Boot Display Config pane: Enable POST Function Hotkeys Displayed. Enable Display F2 to Enter Setup.
Press F10 to save and exit BIOS.

The Advanced Boot Options screen lets you start Windows in advanced troubleshooting modes. You can access the menu by turning on your computer and pressing the F8 key before Windows starts.

I – Hold the Shift key and restart

This is the easiest way to access Windows 10 boot options. All you need to do is hold down the Shift key on your keyboard and restart the PC. Open up the Start menu and click on “Power” button to open power options.

How do I fix BIOS not booting?

If you cannot enter the BIOS setup during boot, follow these steps to clear the CMOS:

Turn off all peripheral devices connected to the computer.
Disconnect the power cord from the AC power source.
Remove the computer cover.
Find the battery on the board. …
Wait one hour, then reconnect the battery.

How do I reset my computer when it wont boot to BIOS?

Reset from Setup Screen

Shut your computer down.
Power your computer back up, and immediately press the key that enters the BIOS setup screen. …
Use the arrow keys to navigate through the BIOS menu to find the option to reset the computer to its default, fall-back or factory settings. …
Restart your computer.

How do I force my computer to start?

Use the power button

Locate your computer’s Power button.
Press and hold that button until your computer shuts down.
Wait until you hear the computer’s fans shut off, and your screen goes completely black.
Wait a few seconds before pressing and holding the power button to initiate your computer’s normal startup.

What to do if F12 is not working?

Resolve unexpected Function (F1 – F12) or other special key behavior on a Microsoft keyboard

The NUM LOCK key.
The INSERT key.
The PRINT SCREEN key.
The SCROLL LOCK key.
The BREAK key.
The F1 key through the F12 FUNCTION keys.

Why do I have to press F2 on startup?

If new hardware was recently installed in your computer, you may receive the prompt “Press F1 or F2 to enter setup”. If you receive this message, the BIOS needs you to verify the configuration of your new hardware. Enter the CMOS setup, verify or change your hardware settings, save your configuration, and exit.

How do I select booting device at startup?

From within Windows, press and hold the Shift key and click the “Restart” option in the Start menu or on the sign-in screen. Your PC will restart into the boot options menu. Select the “Use a device” option on this screen and you can choose a device you want to boot from, such as a USB drive, DVD, or network boot.

The F12 Boot Menu allows you to choose which device that you would like to boot the computer’s Operating System from by pressing the F12 key during the computer’s Power On Self Test, or POST process. Some notebook and netbook models have the F12 Boot Menu disabled by default.

How do I boot my PC?

Boot from USB: Windows

Press the Power button for your computer.
During the initial startup screen, press ESC, F1, F2, F8 or F10. …
When you choose to enter BIOS Setup, the setup utility page will appear.
Using the arrow keys on your keyboard, select the BOOT tab. …
Move USB to be first in the boot sequence.