Fast Boot can be enabled or disabled in the BIOS setup, or in HW Setup under Windows. If you have Fast Boot enabled and you want to get into the BIOS setup. Hold down the F2 key, then power on. That will get you into the BIOS setup Utility.
How do I force Windows 10 to Boot from BIOS?
How to enter the BIOS on a Windows 10 PC
- Navigate to Settings. You can get there by clicking the gear icon on the Start menu. …
- Select Update & Security. …
- Select Recovery from the left menu. …
- Click Restart Now under Advanced startup. …
- Click Troubleshoot.
- Click Advanced options.
- Select UEFI Firmware Settings. …
- Click Restart.
How do I boot into BIOS?
To access your BIOS, you’ll need to press a key during the boot-up process. This key is often displayed during the boot process with a message “Press F2 to access BIOS”, “Press <DEL> to enter setup”, or something similar. Common keys you may need to press include Delete, F1, F2, and Escape.
Should you enable fast boot BIOS?
If you’re dual booting, it’s best not to use Fast Startup or Hibernation at all. … Some versions of BIOS/UEFI work with a system in hibernation and some do not. If yours doesn’t, you can always restart the computer to access BIOS, since the restart cycle will still perform a full shutdown.
What is the boot menu key for Windows 10?
The Advanced Boot Options screen lets you start Windows in advanced troubleshooting modes. You can access the menu by turning on your computer and pressing the F8 key before Windows starts.
How do I boot to Safe Mode in UEFI BIOS?
Switch the computer on and off repeatedly with the power button. When nothing else works on your Windows 10 computer, you can try to open the UEFI blue screen by repeatedly and quickly turning the computer on and off using the power button. You’ll then be able to initiate a restart in safe mode.
How do I boot into BIOS Windows 10 hp?
Access the BIOS Setup Utility using a series of key presses during the boot process.
- Turn off the computer and wait five seconds.
- Turn on the computer, and then immediately press the esc key repeatedly until the Startup Menu opens.
- Press f10 to open the BIOS Setup Utility.
How can I enter BIOS if F2 key is not working?
If the F2 prompt doesn’t appear on the screen, you might not know when you should press the F2 key.
…
- Go to Advanced > Boot > Boot Configuration.
- In the Boot Display Config pane: Enable POST Function Hotkeys Displayed. Enable Display F2 to Enter Setup.
- Press F10 to save and exit BIOS.