How do I open the boot menu in Windows 8?

What is the boot key for Windows 8?

To access the Boot Manager of your system, please press the key combination Shift-F8 during the boot process. Select the desired Safe Mode to start your PC.

How do I access the boot menu?

Configuring the boot order

1. Turn on or restart the computer.
2. While the display is blank, press the f10 key to enter the BIOS settings menu. The BIOS settings menu is accessible by pressing the f2 or the f6 key on some computers.
3. After opening the BIOS, go to the boot settings. …
4. Follow the on-screen instructions to change the boot order.

How do I access my BIOS Windows 8?

[Windows 8] How to enter the BIOS configuration of Windows 8?

1. Click “Settings”.
2. Click “Change PC settings”.
3. Click “General” -> Select “Advanced startup” -> Click “Restart now”. …
4. Click “Troubleshoot “.
5. Click “Advanced options”.
6. Click “UEFI Firmware Settings”.
7. Click “Restart”. …
8. The laptop will enter the BIOS configuration after rebooting the system.

21 дек. 2020 г.

How do I fix Windows 8 not booting?

In System Configuration, go to the Boot tab and, in the Boot options area, check the box that says “Safe boot.” Then, click or tap OK. Windows 8 now tells you that you need to reboot your PC. Click or tap on Restart to reboot right now, or click/tap on “Exit without restart” if you want to restart later.

How do I get into BIOS?

To access your BIOS, you’ll need to press a key during the boot-up process. This key is often displayed during the boot process with a message “Press F2 to access BIOS”, “Press <DEL> to enter setup”, or something similar. Common keys you may need to press include Delete, F1, F2, and Escape.

How do I get advanced boot options?

The Advanced Boot Options screen lets you start Windows in advanced troubleshooting modes. You can access the menu by turning on your computer and pressing the F8 key before Windows starts. Some options, such as safe mode, start Windows in a limited state, where only the bare essentials are started.

How do I open BIOS on Windows 10?

How to access BIOS Windows 10

1. Open ‘Settings. ‘ You’ll find ‘Settings’ under the Windows start menu in the bottom left corner.
2. Select ‘Update & security. ‘ …
3. Under the ‘Recovery’ tab, choose ‘Restart now. ‘ …
4. Select ‘Troubleshoot. ‘ …
5. Click on ‘Advanced options.’
6. Select ‘UEFI Firmware Settings. ‘

11 янв. 2019 г.

How do I find my BIOS model name?

1. Input System Information in Windows Search bar. 2. Model name and BIOS version show as the red mark.
…

1. Click the power button then press and hold the F2.
2. Release F2 then you can see BIOS setup menu.
3. Select [Advanced] –> [ASUS EZ Flash 3 Utility]. Then you will find model name as below shown.

18 дек. 2020 г.

How do I get into BIOS if UEFI is missing?

Method 1: Verifying if the computer is equipped with UEFI

1. Press Windows key + R to open up a Run dialog box. …
2. Inside the System Information window, select System Summary from the left-hand side pane.
3. Then, move over to the right pane and scroll down through the items to find BIOS Mode.

5 апр. 2020 г.

How do I get into BIOS on Windows 8 HP laptop?

Turn on the computer by pressing the Power button and immediately press Esc repeatedly, about once every second, until the Startup Menu opens. When the Startup Menu appears, press F10 to select BIOS Setup.

How do I fix windows not booting?

With any luck, this guide should help find the culprit behind your computer’s unwillingness to boot.

1. Try Windows Safe Mode. …
2. Check Your Battery. …
3. Unplug All Your USB Devices. …
4. Turn Off Fast Boot. …
5. Try a Malware Scan. …
6. Boot to the Command Prompt Interface. …
7. Use System Restore or Startup Repair. …
8. Reassign Your Drive Letter.

13 июл. 2018 г.

How do I fix Windows startup problem?

You can access Startup Repair by clicking Troubleshoot > Advanced Options > Startup Repair on this menu. Windows will ask you for your password and attempt to automatically repair your PC. On Windows 7, you’ll often see the Windows Error Recovery screen if Windows can’t boot properly.

How can I repair my Windows 8?

To do so, follow these steps:

1. Insert the original installation DVD or USB Drive. …
2. Restart your computer.
3. Boot from the disc/USB.
4. At the Install screen, click Repair your computer or press R.
5. Click Troubleshoot.
6. Click Command Prompt.
7. Type these commands: bootrec /FixMbr bootrec /FixBoot bootrec /ScanOs bootrec /RebuildBcd.