How do I get into bios on HP desktop?

How do I get into the BIOS on Windows 10 hp?

After your PC boots back up, you will be met with a special menu that gives you the option to “Use a device,” “Continue,” “Turn off your PC,” or “Troubleshoot.” Within this window, select “Advanced options” then select “UEFI Firmware Settings.” This will allow you to enter BIOS on your Windows 10 PC.

How do I log in to BIOS?

To access your BIOS, you’ll need to press a key during the boot-up process. This key is often displayed during the boot process with a message “Press F2 to access BIOS”, “Press to enter setup”, or something similar. Common keys you may need to press include Delete, F1, F2, and Escape.

How do I get into BIOS on Windows 10?

On Windows 7, 8, or 10, hit Windows+R, type “msinfo32” into the Run box, and then hit Enter. The BIOS version number is displayed on the System Summary pane.

How do I boot into BIOS without rebooting?

However, since the BIOS is a pre-boot environment, you can’t access it directly from within Windows. On some older computers (or those deliberately set to boot slowly), you can hit a function key such as F1 or F2 at power-on to enter the BIOS.

How do I change BIOS settings?

How Do I Completely Change the BIOS on My Computer?

1. Restart your computer and look for the keys–or combination of keys–you must press to access your computer’s setup, or BIOS. …
2. Press the key or combination of keys to access your computer’s BIOS.
3. Use the “Main” tab to change the system date and time.

How can I find my BIOS version?

Finding the BIOS Version on Windows Computers Using the BIOS Menu

1. Restart the computer.
2. Open the BIOS menu. As the computer reboots, press F2, F10, F12, or Del to enter the computer BIOS menu. …
3. Find the BIOS version. In the BIOS menu, look for BIOS Revision, BIOS Version, or Firmware Version.

How do I force my computer into BIOS?

In order to access BIOS on a Windows PC, you must press your BIOS key set by your manufacturer which could be F10, F2, F12, F1, or DEL. If your PC goes through its power on self-test startup too quickly, you can also enter BIOS through Windows 10’s advanced start menu recovery settings.

How can I enter BIOS if F2 key is not working?

If the F2 prompt doesn’t appear on the screen, you might not know when you should press the F2 key.

…

1. Go to Advanced > Boot > Boot Configuration.
2. In the Boot Display Config pane: Enable POST Function Hotkeys Displayed. Enable Display F2 to Enter Setup.
3. Press F10 to save and exit BIOS.

How do I get to HP Advanced BIOS settings?

Getting into advanced BIOS Settings on an HP Gaming Laptop

1. Bring up Settings.
2. Select Update & Security.
3. Click “Recovery” on the left.
4. Click “Restart Now” under Advanced Startup. The computer will reboot into a special menu.
5. Click “Troubleshoot”, then “Advanced Options” then “UEFI Firmware Settings” then “Restart Now”.

What is the boot key for HP desktop?

Hot keys for BootMenu / BIOS Settings

How do I get my HP desktop to boot from USB?

Immediately press the Escape key repeatedly, about once every second, until the Startup Menu opens. Press F9 to open the Boot Device Options menu. Use the up or down arrow key to select the USB flash drive, and then press Enter.

How do I select boot device on HP desktop?

Configuring the boot order

1. Turn on or restart the computer.
2. While the display is blank, press the f10 key to enter the BIOS settings menu. …
3. After opening the BIOS, go to the boot settings. …
4. Follow the on-screen instructions to change the boot order.