How do I fix Windows 8 1 Pro Secureboot isn’t configured correctly build 9600?

How do I remove SecureBoot isn’t configured correctly?

Solution 2

1. Do a full shutdown – (hold shift while selecting shutdown)
2. Restart and enter BIOS (F1).
3. Go to Security > SecureBoot > enable it. Note: This will also disable CSM and set unit for UEFI Only startup. These are required for SecureBoot to work.

What is secure boot isn’t configured correctly?

If the PC does not allow you to enable Secure Boot, try resetting the BIOS back to the factory settings. Save changes and exit. The PC reboots. … For additional troubleshooting steps for PC manufacturers: see Secure Boot isn’t configured correctly: Determine if the PC is in a manufacturing mode (info for manufacturers).

How do I know Secure Boot is enabled?

To check whether Secure Boot is enabled, use these steps:

1. Open Start.
2. Search for System Information and click the top result to open the app.
3. Click on System Summary on the left pane.
4. Check the “Secure Boot State” information. If it reads On, it’s enabled. …
5. Check the “BIOS Mode” information.

Should secure boot be enabled?

Secure Boot must be enabled before an operating system is installed. If an operating system was installed while Secure Boot was disabled, it will not support Secure Boot and a new installation is required. Secure Boot requires a recent version of UEFI. … Secure Boot requires Windows 8.0 or higher.

What does clearing secure boot keys do?

Clearing the Secure Boot database would technically make you unable to boot anything, since nothing to boot would have corresponded to the Secure Boot’s database of signatures/checksums allowed to boot.

Is it OK to disable secure boot?

Secure Boot is an important element in your computer’s security, and disabling it can leave you vulnerable to malware that can take over your PC and leave Windows inaccessible.

How do I know if my UEFI Boot is enabled?

Check Secure Boot status

1. Go to Start.
2. In the search bar, type msinfo32 and press enter.
3. System Information opens. Select System Summary.
4. On the right-side of the screen, look at BIOS Mode and Secure Boot State. If Bios Mode shows UEFI, and Secure Boot State shows Off, then Secure Boot is disabled.

What happens if I enable Secure Boot?

When enabled and fully configured, Secure Boot helps a computer resist attacks and infection from malware. Secure Boot detects tampering with boot loaders, key operating system files, and unauthorized option ROMs by validating their digital signatures.

How does UEFI Secure Boot Work?

Secure Boot establishes a trust relationship between the UEFI BIOS and the software it eventually launches (such as bootloaders, OSes, or UEFI drivers and utilities). After Secure Boot is enabled and configured, only software or firmware signed with approved keys are allowed to execute.