How do I enter BIOS on new computer?

Contents

In order to access BIOS on a Windows PC, you must press your BIOS key set by your manufacturer which could be F10, F2, F12, F1, or DEL. If your PC goes through its power on self-test startup too quickly, you can also enter BIOS through Windows 10’s advanced start menu recovery settings.

How do I get into the BIOS in Windows 10?

F12 key method

Turn the computer on.
If you see an invitation to press the F12 key, do so.
Boot options will appear along with the ability to enter Setup.
Using the arrow key, scroll down and select <Enter Setup>.
Press Enter.
The Setup (BIOS) screen will appear.
If this method does not work, repeat it, but hold F12.

Get ready to act quickly: You need to start the computer and press a key on the keyboard before the BIOS hands over control to Windows. You have only a few seconds to perform this step. On this PC, you’d press F2 to enter the BIOS setup menu.

How do I boot into BIOS without rebooting?

How to enter BIOS without restart the computer

Click >Start.
Go to Section >Settings.
Find and open >Update & Security.
Open the menu >Recovery.
In the Advance startup section, select >Restart now. …
In recovery mode, select and open >Troubleshoot.
Select >Advance option. …
Find and select >UEFI Firmware Settings.

How do I change BIOS settings?

How Do I Completely Change the BIOS on My Computer?

Restart your computer and look for the keys–or combination of keys–you must press to access your computer’s setup, or BIOS. …
Press the key or combination of keys to access your computer’s BIOS.
Use the “Main” tab to change the system date and time.

How do I boot into BIOS Windows 10 hp?

Access the BIOS Setup Utility using a series of key presses during the boot process.

Turn off the computer and wait five seconds.
Turn on the computer, and then immediately press the esc key repeatedly until the Startup Menu opens.
Press f10 to open the BIOS Setup Utility.

How can I enter BIOS if F2 key is not working?

Fast Boot in BIOS reduces computer boot time. With Fast Boot enabled: You can’t press F2 to enter BIOS Setup.
…

Go to Advanced > Boot > Boot Configuration.
In the Boot Display Config pane: Enable POST Function Hotkeys Displayed. Enable Display F2 to Enter Setup.
Press F10 to save and exit BIOS.

The Advanced Boot Options screen lets you start Windows in advanced troubleshooting modes. You can access the menu by turning on your computer and pressing the F8 key before Windows starts.

What happens when reset BIOS?

Resetting your BIOS restores it to the last saved configuration, so the procedure can also be used to revert your system after making other changes. Whatever situation you may be dealing with, remember that resetting your BIOS is a simple procedure for new and experienced users alike.