How do I change the boot order in Windows 10 from command prompt?

Contents

Open an elevated command prompt. Run bcdedit without parameters to find the {identifier} for the boot entry you want to move. Execute the command bcdedit /displayorder {identifier} /addlast . For example, bcdedit /displayorder {current} /addlast .

Can I boot from command prompt?

Booting Windows 10 in Command Prompt requires that you have Windows 10 on a bootable disc or USB drive. Here’s how you can start your Windows 10 PC in Command Prompt: Power on your computer. While powering on, press the appropriate keys on your keyboard to enter the BIOS.

After your computer boots up and the Windows Setup appears, press Shift + F10 keys together on the keyboard. This will open the command prompt window.

How do I change the boot priority in Windows 10?

Once the computer boots up, it will take you to the Firmware settings.

Switch to Boot Tab.
Here you will see Boot Priority which will list connected hard drive, CD/DVD ROM and USB drive if any.
You can use the arrow keys or + & – on your keyboard to change the order.
Save and Exit.

1 апр. 2019 г.

How do I change my boot priority?

Follow the steps below to configure the boot order on most computers.

Turn on or restart the computer.
While the display is blank, press the f10 key to enter the BIOS settings menu. …
After opening the BIOS, go to the boot settings. …
Follow the on-screen instructions to change the boot order.

How do I get a CMD prompt in Windows 10?

Right-click Start and choose Command Prompt or Command Prompt (Admin) from the Quick Link menu. You can also use keyboard shortcuts for this route: Windows key + X, followed by C (non-admin) or A (admin). Type cmd in the search box, then press Enter to open the highlighted Command Prompt shortcut.

How do I get to advanced boot options?

The Advanced Boot Options screen lets you start Windows in advanced troubleshooting modes. You can access the menu by turning on your computer and pressing the F8 key before Windows starts. Some options, such as safe mode, start Windows in a limited state, where only the bare essentials are started.

How do I force BIOS to boot?

To boot to UEFI or BIOS:

Boot the PC, and press the manufacturer’s key to open the menus. Common keys used: Esc, Delete, F1, F2, F10, F11, or F12. …
Or, if Windows is already installed, from either the Sign on screen or the Start menu, select Power ( ) > hold Shift while selecting Restart.

What is the command for BIOS?

When starting your computer, you can continue pressing the right key for your system, to enter the UEFI/BIOS. The right key for your system could be F1, F2, F10, etc.
…
Boot Windows into UEFI or BIOS firmware

Using Keyboard Key.
Using Shift+Restart.
Using Command Prompt.
Using Settings.

23 авг. 2019 г.

How do I change boot options in command prompt?

Restart the computer.
Press the F8 key to open Advanced Boot Options.
Select Repair your computer. Advanced Boot Options on Windows 7.
Press Enter.
At the System Recovery Options, click Command Prompt.
Type: bcdedit.exe.
Press Enter.

What should my boot priority be?

Generally the default boor order sequence is CD/DVD Drive, followed by your hard drive. On a few rigs, I’ve seen CD/DVD, USB-device (removable device), then the hard drive. In regards to recommended settings, it just depends on you.

What is the correct boot sequence for a PC?

What is the correct boot sequence for a PC? D. Here’s the correct boot sequence: power good, CPU, POST, boot loader, operating system.

How do I change the boot order without BIOS?

This method works only if your PC can boot..

While holding down the Shift key, go to start then choose Restart.
From the next screen, Go to Troubleshoot.
Select Advanced Options.
Then click UEFI Firmware Settings.
Again find the Secure Boot option, and switch it to Disabled.

How do I change the boot order in UEFI?

Changing the UEFI boot order

From the System Utilities screen, select System Configuration > BIOS/Platform Configuration (RBSU) > Boot Options > UEFI Boot Order and press Enter.
Use the arrow keys to navigate within the boot order list.
Press the + key to move an entry higher in the boot list.
Press the – key to move an entry lower in the list.

How do I change BIOS settings?

How to Configure the BIOS Using the BIOS Setup Utility

Enter the BIOS Setup Utility by pressing the F2 key while the system is performing the power-on self-test (POST). …
Use the following keyboard keys to navigate the BIOS Setup Utility: …
Navigate to the item to be modified. …
Press Enter to select the item. …
Use the up or down arrow keys or the + or – keys to change a field.

How do I change my default hard drive to boot?

Generally, the steps go like this:

Restart or turn on the computer.
Press the key or keys to enter the Setup program. As a reminder, the most common key used to enter the Setup program is F1. …
Choose the menu option or options to display the boot sequence. …
Set the boot order. …
Save the changes and exit the Setup program.