In order to access BIOS on a Windows PC, you must press your BIOS key set by your manufacturer which could be F10, F2, F12, F1, or DEL. If your PC goes through its power on self-test startup too quickly, you can also enter BIOS through Windows 10’s advanced start menu recovery settings.
How do I enter BIOS setup?
To access your BIOS, you’ll need to press a key during the boot-up process. This key is often displayed during the boot process with a message “Press F2 to access BIOS”, “Press <DEL> to enter setup”, or something similar. Common keys you may need to press include Delete, F1, F2, and Escape.
How do I check my BIOS settings?
Finding the BIOS Version on Windows Computers Using the BIOS Menu
- Restart the computer.
- Open the BIOS menu. As the computer reboots, press F2, F10, F12, or Del to enter the computer BIOS menu. …
- Find the BIOS version. In the BIOS menu, look for BIOS Revision, BIOS Version, or Firmware Version.
How do I reset my BIOS to default?
Reset the BIOS to Default Settings (BIOS)
- Access the BIOS Setup utility. See Accessing BIOS.
- Press the F9 key to automatically load the factory default settings. …
- Confirm the changes by highlighting OK, then press Enter. …
- To save the changes and exit the BIOS Setup utility, press the F10 key.
How do I boot into BIOS without rebooting?
However, since the BIOS is a pre-boot environment, you can’t access it directly from within Windows. On some older computers (or those deliberately set to boot slowly), you can hit a function key such as F1 or F2 at power-on to enter the BIOS.
How do I know if I have UEFI or BIOS?
How to Check If Your Computer Uses UEFI or BIOS
- Press Windows + R keys simultaneously to open the Run box. Type MSInfo32 and hit Enter.
- On the right pane, find the “BIOS Mode”. If your PC uses BIOS, it will display Legacy. If it is using UEFI so it will display UEFI.
Is it safe to update BIOS?
Installing (or “flashing”) a new BIOS is more dangerous than updating a simple Windows program, and if something goes wrong during the process, you could end up bricking your computer. … Since BIOS updates don’t usually introduce new features or huge speed boosts, you probably won’t see a huge benefit anyway.
What happens when reset BIOS?
Resetting your BIOS restores it to the last saved configuration, so the procedure can also be used to revert your system after making other changes. Whatever situation you may be dealing with, remember that resetting your BIOS is a simple procedure for new and experienced users alike.
How do I fix corrupted BIOS?
You can do this one of three ways:
- Boot into the BIOS and reset it to the factory settings. If you are able to boot into the BIOS, go ahead and do so. …
- Remove the CMOS battery from the motherboard. Unplug your computer and open your computer’s case to access the motherboard. …
- Reset the jumper.
How do I resolve a BIOS problem?
Fixing 0x7B Errors at Startup
- Shut down the computer and restart it.
- Start the BIOS or UEFI firmware setup program.
- Change the SATA setting to the correct value.
- Save settings and restart the computer.
- Select Start Windows Normally if prompted.
How do I reset my BIOS without a monitor?
Champion. Easy way to do this, which will work regardless of what motherboard you have, flip the switch on your power supply to off(0) and remove the silver button battery on the motherboard for 30 seconds, put it back in, turn the power supply back on, and boot up, it should reset you to factory defaults.