O rută statică nu este altceva decât o modalitate de a specifica traficul care nu trebuie să treacă prin gateway-ul implicit. Se poate folosi comanda ip pentru a adăuga o rută statică la o altă rețea care nu poate fi accesată prin gateway-ul implicit. De exemplu, gateway-ul VPN sau VLNAN ar putea avea nevoie să utilizeze comanda ip.
What is a static route used for?
A default static route is used to send packets when an explicit route is not present in the routing table. This route is configured with 0.0. 0.0/0 as its destination IPV4 address. By configuring a default static route, a router can match all packets to use this route.
What is static route configuration?
Static routing is a form of routing that occurs when a router uses a manually-configured routing entry, rather than information from dynamic routing traffic. In many cases, static routes are manually configured by a network administrator by adding in entries into a routing table, though this may not always be the case.
Este IP-ul static mai rapid decât DHCP?
Nu using static addresses is not magically faster than using DHCP addresses. … The same result could be accomplished by putting those two PCs onto the same IP subnet using DHCP rather than static ones.
What is the difference between static and dynamic routes?
A static routing table is created, maintained, and updated by a network administrator, manually. A static route to every network trebuie sa be configured on every router for full connectivity. … A dynamic routing table is created, maintained, and updated by a routing protocol running on the router.
Ce înseamnă ruta IP 0.0 0.0?
Ruta IP 0.0. … 0.0 Fa0/0 în limba engleză simplă înseamnă „pachetele de la orice adresă IP cu orice mască de subrețea sunt trimise la Fa0/0″. Fără alte rute mai specifice definite, acest router va trimite tot traficul către Fa0/0.
How do I enable a static route?
In the WebUI
- Navigate to the Configuration > Network > IP > IP Routes page.
- Click Add to add a static route to a destination network or host. Enter the destination IP address and network mask (255.255. …
- Click Done to add the entry. Note that the route has not yet been added to the routing table.
What is default route IP?
A default route is the route that takes effect when no other route is available for an IP destination address. … The default route in IPv4 is designated as 0.0. 0.0/0 or simply 0/0. Similarly, in IPv6, the default route is specified as ::/0. The subnet mask /0 specifies all networks, and is the shortest match possible.