If your computer keeps booting to BIOS, the issue may be triggered by the incorrect boot order. … If you find it, set the disk as the primary boot option. If your hard drive listed under boot device cannot be found in BIOS, change this hard disk. Check if the disk is plugged in correctly and can work on another PC.
How do I stop my computer from booting into BIOS?
Disable Fast Boot and set your system drive as the primary option. Access the BIOS utility. Go to Advanced settings, and choose the Boot settings. Disable Fast Boot, save changes and restart your PC.
How do I get out of BIOS?
Press the F10 key to exit the BIOS setup utility. In the Setup Confirmation dialog box, press the ENTER key to save the changes and exit.
How do I fix the BIOS on my computer?
Fixing 0x7B Errors at Startup
- Shut down the computer and restart it.
- Start the BIOS or UEFI firmware setup program.
- Change the SATA setting to the correct value.
- Save settings and restart the computer.
- Select Start Windows Normally if prompted.
29 окт. 2014 г.
How do I fix BIOS boot loop?
Unplug power cable from PSU. Press the power button for 20 seconds. Remove the CMOS battery and wait 5 minutes and insert CMOS battery back. Make sure to connect only the disk where Windows was installed…if you installed Windows while having only one disk on your PC.
How do I boot into BIOS?
To access your BIOS, you’ll need to press a key during the boot-up process. This key is often displayed during the boot process with a message “Press F2 to access BIOS”, “Press to enter setup”, or something similar. Common keys you may need to press include Delete, F1, F2, and Escape.
What is UEFI boot mode?
UEFI stands for Unified Extensible Firmware Interface. … UEFI has discrete driver support, while BIOS has drive support stored in its ROM, so updating BIOS firmware is a bit difficult. UEFI offers security like “Secure Boot”, which prevents the computer from booting from unauthorized/unsigned applications.
What to do if computer is not booting?
What to Do When Your Computer Won’t Start
- Give ‘er More Power. …
- Check Your Monitor. …
- Listen for the Message at the Beep. …
- Unplug Unnecessary USB Devices. …
- Reseat the Hardware Inside. …
- Explore the BIOS. …
- Scan for Viruses Using a Live CD. …
- Boot Into Safe Mode.
How do I reset my BIOS to default?
Reset the BIOS to Default Settings (BIOS)
- Access the BIOS Setup utility. See Accessing BIOS.
- Press the F9 key to automatically load the factory default settings. …
- Confirm the changes by highlighting OK, then press Enter. …
- To save the changes and exit the BIOS Setup utility, press the F10 key.
Why can’t I exit BIOS?
If you can’t exit BIOS on your PC, the issue is most likely caused by your BIOS settings. … Enter BIOS, go to Security Options and disable Secure Boot. Now save changes and restart your PC. Enter BIOS again and this time go to Boot section.
How do you check if BIOS is working properly?
How to Check the Current BIOS Version on Your Computer
- Reboot Your Computer.
- Use the BIOS Update Tool.
- Use Microsoft System Information.
- Use a Third-Party Tool.
- Run a Command.
- Search the Windows Registry.
31 дек. 2020 г.
What is BIOS setting on computer?
The BIOS (Basic Input Output System) controls communication between system devices such as the disk drive, display, and keyboard. … Each BIOS version is customized based on the computer model line’s hardware configuration and includes a built-in setup utility to access and change certain computer settings.
Why does my PC keep rebooting on startup?
Why does my computer keep restarting? There could be multiple reasons for the computer to keep restarting. It could be because of some hardware failure, malware attack, corrupted driver, faulty Windows update, dust in the CPU, and many such reasons.
What causes a boot loop PC?
The Windows boot loop problem is often the result of a device driver, a bad system component or hardware such as the hard disk that causes a Windows system to spontaneously reboot in the middle of the boot process. The result is a machine that can never boot completely and is stuck in a reboot loop.
How do I get my computer out of boot loop?
Unplug power and remove battery, press and hold power button for 30 seconds to release all power from circuitry, plug back in and power up to see if any change.