If the external hard drive is not showing up in Windows 10, it may be caused by the incompatible file system format. If there is no data on the drive, you can right-click the partition on the drive in Disk Management and select Format to format the drive to NTFS. But this will lost all data.
How do I get Windows 10 to recognize my external hard drive?
Press Windows Key + X and choose Disk Management from the menu. Locate your portable hard drive in Disk Management and right-click it. Choose Change Drive Letter and Paths. A new window will appear showing you the current letter of your portable hard drive.
How do I fix Windows not recognizing my external hard drive?
Here are a few troubleshooting steps you can take to remedy the situation.
- Make Sure It’s Plugged In and Powered On. Western Digital My Book. …
- Try Another USB Port (or Another PC) …
- Update Your Drivers. …
- Enable and Format the Drive in Disk Management. …
- Clean the Disk and Start From Scratch. …
- Remove and Test the Bare Drive.
Why is my external hard drive not showing up on my computer?
If the drive still isn’t working, unplug it and try a different USB port. … If it’s plugged into a USB 3.0 port, try a USB 2.0 port. If it’s plugged into a USB hub, try plugging it directly into the PC instead. You might also try it in another computer.
Why is my hard drive not detected?
If your new harddisk is not detected by or Disk Manager, it could be because of a driver issue, connection issue, or faulty BIOS settings. These can be fixed. Connection issues can be from a faulty USB port, or a damaged cable. Incorrect BIOS settings may cause the new hard drive to be disabled.
What do I do if my laptop is not detecting my hard drive?
How to confirm whether the hard drive is spinning up or not?
- Boot the computer and try to catch some noise.
- Power off the system.
- Disconnect the power cord from the system.
- Remove the power cable when the hard disk is not detected, or the hard disk you are trying to fix.
- Reconnect the power cord to the system itself.
How do I get my computer to recognize my Seagate external hard drive?
Turn off computer, disconnect Seagate external hard drive and connect it with another cable. If your Seagate external hard drive is detected, the original cable is the cause. If the problem still appears, connect the external hard drive to another USB port.
How do I get BIOS to recognize my hard drive?
Check if the hard drive is disabled in the BIOS
- Restart PC and enter system setup (BIOS) by pressing F2.
- Check and switch on hard drive detection in system configurations.
- Enable the auto-detection for future purpose.
- Reboot and check if the drive is detectable in BIOS.