In order to access BIOS on a Windows PC, you must press your BIOS key set by your manufacturer which could be F10, F2, F12, F1, or DEL. If your PC goes through its power on self-test startup too quickly, you can also enter BIOS through Windows 10’s advanced start menu recovery settings.
Which key is for BIOS?
To access your BIOS, you’ll need to press a key during the boot-up process. This key is often displayed during the boot process with a message “Press F2 to access BIOS”, “Press <DEL> to enter setup”, or something similar. Common keys you may need to press include Delete, F1, F2, and Escape.
How do I enter BIOS setup?
How to Configure the BIOS Using the BIOS Setup Utility
- Enter the BIOS Setup Utility by pressing the F2 key while the system is performing the power-on self-test (POST). …
- Use the following keyboard keys to navigate the BIOS Setup Utility: …
- Navigate to the item to be modified. …
- Press Enter to select the item. …
- Use the up or down arrow keys or the + or – keys to change a field.
What are the 3 common key used to access the BIOS?
Common keys used to enter BIOS Setup are F1, F2, F10, Esc, Ins, and Del. After the Setup program is running, use the Setup program menus to enter the current date and time, your hard drive settings, floppy drive types, video cards, keyboard settings, and so on.
How can I enter BIOS if F2 key is not working?
F2 key pressed at the wrong time
- Make sure the system is off, and not in Hibernate or Sleep mode.
- Press the power button and hold it down for three seconds and release it. The power button menu should display. …
- Press F2 to enter BIOS Setup.
What is the main function of BIOS?
A computer’s Basic Input Output System and Complementary Metal-Oxide Semiconductor together handle a rudimentary and essential process: they set up the computer and boot the operating system. The BIOS’s primary function is to handle the system setup process including driver loading and operating system booting.
How do I enter BIOS on Windows 10?
How to access BIOS Windows 10
- Open ‘Settings. ‘ You’ll find ‘Settings’ under the Windows start menu in the bottom left corner.
- Select ‘Update & security. ‘ …
- Under the ‘Recovery’ tab, choose ‘Restart now. ‘ …
- Select ‘Troubleshoot. ‘ …
- Click on ‘Advanced options.’
- Select ‘UEFI Firmware Settings. ‘
11 янв. 2019 г.
What are BIOS settings?
The BIOS (Basic Input Output System) controls communication between system devices such as the disk drive, display, and keyboard. … Each BIOS version is customized based on the computer model line’s hardware configuration and includes a built-in setup utility to access and change certain computer settings.
How do you set BIOS to default setting?
Reset the BIOS to Default Settings (BIOS)
- Access the BIOS Setup utility. See Accessing BIOS.
- Press the F9 key to automatically load the factory default settings. …
- Confirm the changes by highlighting OK, then press Enter. …
- To save the changes and exit the BIOS Setup utility, press the F10 key.
How do you change BIOS settings?
1. Navigate to settings.
- Navigate to settings. You can get there by clicking the gear icon on the Start menu.
- Select Update & security.
- Select Recovery from the left menu.
- Click Restart Now under Advanced startup. …
- Click Troubleshoot.
- Click Advanced options.
- Select UEFI Firmware Settings. …
- Click Restart.
29 апр. 2019 г.
Why can’t I get into my BIOS?
Step 1: Go to Start > Settings > Update & Security. Step 2: Under the Recovery window, click Restart now. Step 3: Click Troubleshoot > Advanced options > UEFI Firmware Settings. Step 4: Click Restart and your PC can go to BIOS.
Where is the Setup key?
Computers manufactured in the last few years allow you to enter the BIOS setup using one of the five keys shown below during the boot process. F1, F2, and F10 are all function keys on the top of the keyboard. ** F10 is also used for the boot menu. If F10 opens a boot menu, your setup key is likely F2.
How do I boot into BIOS without rebooting?
How to enter BIOS without restart the computer
- Click >Start.
- Go to Section >Settings.
- Find and open >Update & Security.
- Open the menu >Recovery.
- In the Advance startup section, select >Restart now. The computer will restart to enter recovery mode.
- In recovery mode, select and open >Troubleshoot.
- Select >Advance option. …
- Find and select >UEFI Firmware Settings.
How do I use F2 key in Windows 10?
You can try for F2 if the screen doesn’t show at the start. Once you enter the BIOS or UEFI settings, locate to the function keys option in the system configuration or advanced settings, once you find it, enable or disable the function keys as desired.
How do I fix BIOS not displaying?
Try to remove your battery for a few seconds and then try to reboot your PC. As soon as it starts try to get to the BIOS CP by pressing the BIOS CP buttons. They will likely be ESC, F2, F10 and DEL.
How do I enable function keys?
Press fn and the left shift key at the same time to enable fn (function) mode. When the fn key light is on, you must press the fn key and a function key to activate the default action.