Can I enter BIOS without restarting?
You’ll find it in the Start menu. As long as you are able to access your Windows desktop, you should be able to enter the UEFI/BIOS without worrying about pressing special keys at boot time. Entering the BIOS requires you to restart your PC.
How do I get into BIOS?
Method 2: Use Windows 10’s Advanced Start Menu
- Navigate to Settings.
- Click Update & Security.
- Select Recovery in the left pane.
- Click Restart now under the Advanced startup header. Your computer will reboot.
- Click Troubleshoot.
- Click Advanced options.
- Click UEFI Firmware Settings.
- Click Restart to confirm.
How can I enter BIOS if F2 key is not working?
If the F2 prompt doesn’t appear on the screen, you might not know when you should press the F2 key.
…
- Go to Advanced > Boot > Boot Configuration.
- In the Boot Display Config pane: Enable POST Function Hotkeys Displayed. Enable Display F2 to Enter Setup.
- Press F10 to save and exit BIOS.
What key will you press to enter BIOS?
In order to access BIOS on a Windows PC, you must press your BIOS key set by your manufacturer which could be F10, F2, F12, F1, or DEL. If your PC goes through its power on self-test startup too quickly, you can also enter BIOS through Windows 10’s advanced start menu recovery settings.
How do I force BIOS to boot from USB?
Boot from USB: Windows
- Press the Power button for your computer.
- During the initial startup screen, press ESC, F1, F2, F8 or F10. …
- When you choose to enter BIOS Setup, the setup utility page will appear.
- Using the arrow keys on your keyboard, select the BOOT tab. …
- Move USB to be first in the boot sequence.
How do I reset my BIOS to default?
Reset the BIOS to Default Settings (BIOS)
- Access the BIOS Setup utility. See Accessing BIOS.
- Press the F9 key to automatically load the factory default settings. …
- Confirm the changes by highlighting OK, then press Enter. …
- To save the changes and exit the BIOS Setup utility, press the F10 key.
How do I open BIOS on Windows 10?
How to enter the BIOS on a Windows 10 PC
- Navigate to Settings. You can get there by clicking the gear icon on the Start menu. …
- Select Update & Security. …
- Select Recovery from the left menu. …
- Click Restart Now under Advanced startup. …
- Click Troubleshoot.
- Click Advanced options.
- Select UEFI Firmware Settings. …
- Click Restart.
How do I change BIOS settings?
How Do I Completely Change the BIOS on My Computer?
- Restart your computer and look for the keys–or combination of keys–you must press to access your computer’s setup, or BIOS. …
- Press the key or combination of keys to access your computer’s BIOS.
- Use the “Main” tab to change the system date and time.
What to do if F12 is not working?
Resolve unexpected Function (F1 – F12) or other special key behavior on a Microsoft keyboard
- The NUM LOCK key.
- The INSERT key.
- The PRINT SCREEN key.
- The SCROLL LOCK key.
- The BREAK key.
- The F1 key through the F12 FUNCTION keys.
What to do if F2 is not working?
Under the “Keyboard” tab, check or uncheck the “Use all F1, F2, etc. keys as standard function keys” according to your preferences. If it is checked, the default features (Brightness, Expose, Volume, etc.) will only work if you simultaneously hold down the “Fn” key.
Why do I have to press F2 on startup?
If new hardware was recently installed in your computer, you may receive the prompt “Press F1 or F2 to enter setup”. If you receive this message, the BIOS needs you to verify the configuration of your new hardware. Enter the CMOS setup, verify or change your hardware settings, save your configuration, and exit.