Statisks maršruts nav nekas cits kā veids, kā norādīt trafiku, kas nedrīkst iet caur noklusējuma vārteju. Var izmantot komandu ip, lai pievienotu statisku maršrutu citam tīklam, kuram nevar piekļūt, izmantojot noklusējuma vārteju. Piemēram, VPN vārtejai vai VLNAN, iespējams, būs jāizmanto komanda ip.
What is a static route used for?
A default static route is used to send packets when an explicit route is not present in the routing table. This route is configured with 0.0. 0.0/0 as its destination IPV4 address. By configuring a default static route, a router can match all packets to use this route.
What is static route configuration?
Static routing is a form of routing that occurs when a router uses a manually-configured routing entry, rather than information from dynamic routing traffic. In many cases, static routes are manually configured by a network administrator by adding in entries into a routing table, though this may not always be the case.
Vai statiskais IP ir ātrāks par DHCP?
Nē using static addresses is not magically faster than using DHCP addresses. … The same result could be accomplished by putting those two PCs onto the same IP subnet using DHCP rather than static ones.
What is the difference between static and dynamic routes?
A static routing table is created, maintained, and updated by a network administrator, manually. A static route to every network jābūt be configured on every router for full connectivity. … A dynamic routing table is created, maintained, and updated by a routing protocol running on the router.
Ko nozīmē IP maršruts 0.0 0.0?
IP maršruts 0.0. … 0.0 Fa0/0 vienkāršā angļu valodā nozīmē “paketes no jebkuras IP adreses ar jebkuru apakštīkla masku tiek nosūtītas uz Fa0/0″. Ja nav definēti citi specifiskāki maršruti, šis maršrutētājs visu trafiku nosūtīs uz Fa0/0.
How do I enable a static route?
In the WebUI
- Dodieties uz lapu Konfigurācija > Tīkls > IP > IP maršruti.
- Noklikšķiniet uz Pievienot, lai galamērķa tīklam vai resursdatoram pievienotu statisku maršrutu. Ievadiet galamērķa IP adresi un tīkla masku (255.255. …
- Noklikšķiniet uz Gatavs, lai pievienotu ierakstu. Ņemiet vērā, ka maršruts vēl nav pievienots maršrutēšanas tabulai.
What is default route IP?
A default route is the route that takes effect when no other route is available for an IP destination address. … The default route in IPv4 is designated as 0.0. 0.0/0 or simply 0/0. Similarly, in IPv6, the default route is specified as ::/0. The subnet mask /0 specifies all networks, and is the shortest match possible.