Open Windows File Explorer, locate and right-click on the USB which is write-protected, and select “Property”. Step 3. Go to the General tab, uncheck “Read Only”, click “Apply” and “OK” to finish. After removing write protection on your USB or pen drive, you can directly access the device with ease.
How do I remove write protection on a USB drive on Windows 7?
Edit the Registry in Windows 7 to Remove Write Protection
- Press Windows key+R.
- In the Run dialog box, enter regedit and press Enter.
- Navigate to HKEY_LOCAL_MACHINE > SYSTEM > CurrentControlSet > Services.
- Select USBSTOR.
- Double-click Start.
- In the dialog box, enter 3.
- Close the Registry Editor.
How do I remove write protection on a USB drive?
To remove the write protection, simply open your Start menu, and click on Run. Type in regedit and press Enter. This will open the registry editor. Double-click the WriteProtect key located in the right side pane and set the value to 0.
What can I do if my USB flash drive is write-protected or read only?
The write-protection switch is useful for keeping the contents of your drive safe from malware when you need to view them on a public computer. If your device has this switch, move it to the “Lock” position. This action effectively sets all files, and the device itself, to read-only mode.
Why can’t I remove write protection USB?
Disk Write Protected FAQ
If your USB flash drive, SD card or hard drive is write-protected, you can easily remove write protection. You can try running a virus scan, checking and ensuring the device isn’t full, disabling read-only status for a file, using diskpart, editing Windows Registry and formatting the device.
How do you unlock a flash drive?
Type select disk N (where N is the number of the disk that corresponds to the flash drive) and press Enter. Type attributes disk clear readonly and press Enter. This will unlock the device for writing.
How do I remove write protection from a USB drive in Windows 10?
To remove the write protection with Diskpart, type the command ATTRIBUTES DISK CLEAR READONLY. If it works, that will be confirmed by the line Disk attributes cleared successfully. Double-check this by trying to copy a small file to your USB drive. If it works, great.
How do I remove write protection from a USB drive using command prompt?
Disable write protection using command line (CMD)
- Connect your write protected SD card to your computer.
- Right Click on Start. …
- Type diskpart and hit Enter.
- Type list disk and hit Enter. …
- Type select disk <number of your disk>. …
- Type attributes disk clear readonly and press Enter.
How do you unlock a write protected SD card?
There is a Lock switch on the left side of the SD card. Make sure the Lock switch is slid up (unlock position). You will not be able to modify or delete the contents on the memory card if it is locked. SOLUTION 2 – Toggle the lock switch.
Why did my flash drive became read only?
The cause of this is due to the filing system the storage device is formatted in. … The cause of the “Read Only” behavior is due to the format of the file system. Many storage devices such as USB drives and external hard disk drives come pre-formatted in NTFS because a larger number of consumers are using them on PCs.
How do I fix a corrupted flash drive?
You can also try to fix corrupted USB drives with First Aid.
- Go to Applications > Disk Utility.
- Select the USB drive from the sidebar of Disk Utility.
- Click First Aid on the top of the window.
- Click Run on the pop-up window.
- Wait until the scanning process finished.