Quick Answer: How To Ping In Linux?

Method 1 Using the Ping Command

  • Open Terminal on your computer. Click or double-click the Terminal app icon—which resembles a black box with a white “>_” in it—or press Ctrl + Alt + T at the same time.
  • Type in the “ping” command.
  • Press ↵ Enter .
  • Review the ping speed.
  • Stop the ping process.

Where is ping command in Linux?

PING (Packet INternet Groper) command is the best way to test connectivity between two nodes. Whether it is Local Area Network (LAN) or Wide Area Network (WAN). Ping use ICMP (Internet Control Message Protocol) to communicate to other devices. You can ping host name of ip address using below command.

Why we use ping command in Linux?

Linux Ping Command. The ping command is one of the most used utilities for troubleshooting, testing and diagnosing network connectivity issues. Ping works by sending one or more ICMP (Internet Control Message Protocol) Echo Request packages to a specified destination IP on the network and waits for a reply.

How do I ping in Ubuntu?

You can launch the Terminal by going to the Dash, searching for “Terminal”, and then clicking on the icon for Terminal when it appear. You can also launch the Terminal by hitting the CTRL+ALT+T keys simultaneously. The ping command sends test network packets to a target, which then answers with responding packets.

What does command PING do?

The ping command is usually used as a simple way to verify that a computer can communicate over the network with another computer or network device. The ping command operates by sending Internet Control Message Protocol (ICMP) Echo Request messages to the destination computer and waiting for a response.

How do I ping an IP address in Linux?

Method 1 Using the Ping Command

  1. Open Terminal on your computer. Click or double-click the Terminal app icon—which resembles a black box with a white “>_” in it—or press Ctrl + Alt + T at the same time.
  2. Type in the “ping” command.
  3. Press ↵ Enter .
  4. Review the ping speed.
  5. Stop the ping process.

How does ping command work in Linux?

The ping command uses ICMP (Internet Control Message Protocol) and works by sending an ICMP echo request message to the specified IP address.

How do I lower my ping?


  • Move closer to the router.
  • Close any background programs and websites.
  • Reduce the number of devices using Wi-Fi.
  • Use local servers.
  • Connect your device to your router via Ethernet cable.
  • Restart your router and modem.
  • Call your Internet Service Provider’s customer service line.
  • Replace your router.

How do you ping?

To ping a computer by IP address:

  1. Open a shell prompt (in Microsoft Windows, the Command Prompt or MS-DOS Prompt on the Start Menu).
  2. Type ping followed by a space and then the IP address.
  3. Press the Enter (or Return) key.

How use nslookup Linux?

nslookup followed by the domain name will display the “A Record” (IP Address) of the domain. Use this command to find the address record for a domain. It queries to domain name servers and get the details. You can also do the reverse DNS look-up by providing the IP Address as argument to nslookup.

How do I find the IP address of a Linux server?

The following commands will get you the private IP address of your interfaces:

  • ifconfig -a.
  • ip addr (ip a)
  • hostname -I. | awk ‘{print $1}’
  • ip route get |
  • (Fedora) Wifi-Settings→ click the setting icon next to the Wifi name that you are connected to → Ipv4 and Ipv6 both can be seen.
  • nmcli -p device show.

How do I ping from terminal?

To initiate a ping test in Mac OS X:

  1. Open Terminal by navigating to /Applications/Utilities.
  2. In the Terminal window type ping <server> , where <server> is the hostname or IP address of the server that you want to ping.
  3. Press Enter.
  4. To stop the ping, after seeing enough results, press Ctrl + C.

How find IP address Linux?

You can determine the IP address or addresses of your Linux system by using the hostname , ifconfig , or ip commands. To display the IP addresses using the hostname command, use the -I option. In this example the IP address is

What happens when we ping an IP address?

When you usually ping a system or a network, the ICMP error request signal is sent to the destination host and the response signal is sent back to the source (sender). Here also the same happens, the ICMP protocol alone takes place no need of MAC address, coz its the same system itself.

What is a good ping?

In general though I would go with these rules of thumb: less than 50ms ping is really good, less than 100ms ping is good to average, 150ms is where you are going to start having problems with games, and above 150 ms ping you may experience lag and such in games.

How does a ping work?

How Ping works[edit] The Internet Ping program works much like a sonar echo-location, sending a small packet of information containing an ICMP ECHO_REQUEST to a specified computer, which then sends an ECHO_REPLY packet in return. The IP address is set by convention to always indicate your own computer.

How do I ping to find my IP?


  • Open the Command Prompt or Terminal. Every operating system has a command line interface that will allow you to run the Ping command.
  • Enter the Ping command. Type ping hostname or ping IP address .
  • Press Enter to see your ping output. The results will be displayed beneath the current command line.

How assign IP address to ifconfig in Linux?

To get started, type ifconfig at the terminal prompt, and then hit Enter. This command lists all network interfaces on the system, so take note of the name of the interface for which you want to change the IP address.

What is NIC card Linux?

Ethernet Channel Bonding enables two or more Network Interfaces Card (NIC) to a single virtual NIC card which may increase the bandwidth and provides redundancy of NIC Cards. This is a great way to achieve redundant links, fault tolerance or load balancing networks in production system.

Photo in the article by “Yo también quiero tener un estúpido blog” http://akae.blogspot.com/2009/

Like this post? Please share to your friends:
OS Today