Quick Answer: How To Install Samba In Ubuntu?

Contents

Setting up the Samba File Server on Ubuntu/Linux:

Open the terminal.
Install samba with the following command: sudo apt-get install samba smbfs.
Configure samba typing: vi /etc/samba/smb.conf.
Set your workgroup (if necesary).
Set your share folders.
Restart samba.
Create the share folder: sudo mkdir /your-share-folder.

How do I install Samba?

Installing Samba

On your Linux machine, open a terminal window.
Install the necessary software with the command sudo apt-get install -y samba samba-common python-glade2 system-config-samba.
Type your sudo password and hit Enter.
Allow the installation to complete.

How do I start Samba on Ubuntu?

You can also do this way:

Start sudo /etc/init.d/smbd start.
Stop sudo /etc/init.d/smbd stop.
Restart sudo /etc/init.d/smbd restart. If you got an error, try using these commends this nmbd instead.

How do I install and configure Samba in Ubuntu for file sharing?

Step 1: Identify Windows Workgroup.
Step 2: Add Ubuntu Machine IP to Windows Host File.
STEP 3: ENABLE WINDOWS FILESHARING.
Step 4: Install Samba on Ubuntu.
Step 5: Configure Samba Public share.
Step 6: Create the Public folder to share.
Step 6: Configure Samba Private Share.

Procedures

Install Samba.
Set a password for your user in Samba.
Create a directory to be shared.
Make a safe backup copy of the original smb.conf file to your home folder, in case you make an error.
Edit the file “/etc/samba/smb.conf”
Restart the samba:

How do I access a shared folder in Ubuntu?

To access the Windows 7 shared folder from Ubuntu, you have to use the Connect to Serveroption. From the top menu toolbar click on Places and then on Connect to Server. From the Service type drop-down menu, select Windows share. In the Server text filed type the name or the IP Address of the Windows 7 computer.

Where is Samba config file Ubuntu?

1 Answer. The share definition is located at /var/lib/samba/usershares when you create the share with the Nautilus GUI interface. The main Samba file share server (smbd and nmbd) is configured at /etc/samba/smb.conf. Root created shares are also configured at /etc/samba/smb.conf.

How do I add a user to samba?

Samba Add a User

Step # 1: Add a user joe to UNIX/Linux system. adduser command adds user to the system according to command line options and configuration information in /etc/adduser.conf.
Step # 2: Add a user to samba.
Step # 3: Add a user to a Samba share.
Step #4: Restart the samba.
A note about adding users on Samba version 4.x.

What is Samba for Ubuntu?

Samba is an open-source software suite that runs on Unix/Linux based platforms but is able to communicate with Windows clients like a native application. So Samba is able to provide this service by employing the Common Internet File System (CIFS).

How to share an external USB hard drive from Ubuntu to a Windows network

Connect and mount the drive to the Ubuntu computer.
Do not right-click on the drive and go into the sharing options via the drive’s properties.
Make sure you have Samba installed.
Install, if you haven’t already, install the Samba GUI.

How do I create a shared folder in Ubuntu?

Ubuntu 10.04 host

Create a folder on the Host computer (ubuntu) that you would like to share, for example ~/share.
Boot the Guest operating system in VirtualBox.
Select Devices -> Shared Folders
Choose the ‘Add’ button.
Select ‘/home/<user>/share’ for Folder Path.
Select ‘share’ for Folder Name.

How to Share Files between Windows and Linux

Right-click the folder you would like to share and click Properties.
Open the sharing tab and click Advanced Sharing.
Check the ‘share this folder’ box and click on Permissions.
Choose everyone to give full control (You can give read or write permissions only, it depends on your requirements).
Click OK.

What is Ubuntu Tasksel?

Tasksel is a Debian/Ubuntu tool that installs multiple related packages as a co-ordinated “task” onto your system.

How do I mount a shared folder in Ubuntu?

Steps:

Open VirtualBox.
Right-click your VM, then click Settings.
Go to Shared Folders section.
Add a new shared folder.
On Add Share prompt, select the Folder Path in your host that you want to be accessible inside your VM.
In the Folder Name field, type shared.
Uncheck Read-only and Auto-mount, and check Make Permanent.

How do I navigate to a folder in Ubuntu terminal?

File & Directory Commands

To navigate into the root directory, use “cd /”
To navigate to your home directory, use “cd” or “cd ~”
To navigate up one directory level, use “cd ..”
To navigate to the previous directory (or back), use “cd -“

How do I mount a network drive in Ubuntu?

Run below command so that your Ubuntu can resolve Windows computer name on a DHCP network. Mount (map) network drive: Now edit the fstab file to mount network share on start up. insert the username and password for accessing the remote share.

How do I start Samba on Linux?

Setting up the Samba File Server on Ubuntu/Linux:

Open the terminal.
Install samba with the following command: sudo apt-get install samba smbfs.
Configure samba typing: vi /etc/samba/smb.conf.
Set your workgroup (if necesary).
Set your share folders.
Restart samba.
Create the share folder: sudo mkdir /your-share-folder.

Samba is an open-source implementation of the SMB/CIFS networking protocol used in Windows environments for shared services such as file and printer access and Active Directory. Samba can also be used to create cross-platform file shares in a configuration called a standalone server.

How to Mount a SMB Share in Ubuntu

Step 1: Install the CIFS Utils pkg. sudo apt-get install cifs-utils.
Step 2: Create a mount point. sudo mkdir /mnt/local_share.
Step 3: Mount the volume. sudo mount -t cifs //<vpsa_ip_address>/<export_share> /mnt/<local_share>
Using NAS Access Control on the VPSA.

Why Samba is used in Linux?

Linux Samba Server is one of the powerful servers that helps you to share files and printers with Windows-based and other operating systems. It is an open-source implementation of the Server Message Block/Common Internet File System (SMB/CIFS) protocols.

Is Samba and SMB the same?

Samba is a free software re-implementation of the SMB networking protocol, and was originally developed by Andrew Tridgell. The name Samba comes from SMB (Server Message Block), the name of the standard protocol used by the Microsoft Windows network file system.

What is the use of Samba?

Samba is a suite of Unix applications that speak the Server Message Block (SMB) protocol. Microsoft Windows operating systems and the OS/2 operating system use SMB to perform client-server networking for file and printer sharing and associated operations.

Photo in the article by “Wikimedia Commons” https://commons.wikimedia.org/wiki/File:Ubuntu_14.04_Filesystem_-_Ru.png