How increase LUN size in Linux?

How can I increase the size of my Lun?

To expand the size of a LUN:

  1. Select Shares.
  2. Click the Data Set button (with four cubes, ).
  3. Select the LUN for which you want to expand the size.
  4. Right-click a share or LUN.
  5. Select Expand.
  6. Enter the following settings:
  7. Click Expand.
  8. Add the LUN to the LUN group to which it belonged before the expansion.

How increase LV size in Linux?

How to Extend LVM Partition with lvextend command in Linux

  1. Step:1 Type ‘ df -h’ command to list the file system.
  2. Step:2 Now check whether free space is available space in the volume group.
  3. Step:3 Use lvextend command to increase the size.
  4. Step:3 Run the resize2fs command.
  5. Step:4 Use df command and verify /home size .

18 янв. 2020 г.

How check LUN size in Linux?

so the first device in command “ls -ld /sys/block/sd*/device” corresponds to the first device scene in the command “cat /proc/scsi/scsi” command above. i.e. Host: scsi2 Channel: 00 Id: 00 Lun: 29 corresponds to 2:0:0:29. Check the highlighted portion in both commands to correlate. Another way is to use sg_map command.

What is LUN storage?

In computer storage, a logical unit number, or LUN, is a number used to identify a logical unit, which is a device addressed by the SCSI protocol or by Storage Area Network protocols that encapsulate SCSI, such as Fibre Channel or iSCSI.

How do I increase volume in netapp?

1. Select Storage > Volumes. 2. Select the volume for which you want to increase capacity, and then select Increase Capacity.

How do I show volume groups in Linux?

There are two commands you can use to display properties of LVM volume groups: vgs and vgdisplay . The vgscan command, which scans all the disks for volume groups and rebuilds the LVM cache file, also displays the volume groups. For information on the vgscan command, see Section 5.3.

How do I resize a partition in Linux?

To resize a partition using fdisk :

  1. Unmount the device: …
  2. Run fdisk disk_name . …
  3. Use the p option to determine the line number of the partition to be deleted. …
  4. Use the d option to delete a partition. …
  5. Use the n option to create a partition and follow the prompts. …
  6. Set the partition type to LVM:

What is a logical volume?

An allocation of storage that is less than or more than one physical drive. For example, drive C: and D: on a Windows PC might be two logical volumes on disk drive 0. See volume set, volume, logical drive, logical backup and partition.

How do you measure LUN size?

1) Check attached LUN or SAN disk in Linux

You can use iscsiadm (only used when storage using iscsi target) command to get information about attached lun. You can also check below path for lun information.

Where is New Lun in Linux?

How to Scan/Detect New LUNs on Linux

  1. 1) Using /sys class file. You can use the echo command to scan each scsi host device as below. …
  2. 2) Scan lun with multipath/powermt. You can check current multipath setup using multipath or powermt command. …
  3. 3) Using Script. …
  4. Conclusion.

12 июн. 2011 г.

How do I find HBA in Linux?


You probably will find your HBA module in /etc/modprobe. conf. There you can identify with “modinfo” if the module is for QLOGIC or EMULEX. Then use SanSurfer (qlogic) or HBA Anywhere (emulex) to obtain detailed and accurate information.

What are the 3 types of storage?

Types of storage devices

  • Primary Storage: Random Access Memory (RAM) Random Access Memory, or RAM, is the primary storage of a computer. …
  • Secondary Storage: Hard Disk Drives (HDD) & Solid-State Drives (SSD) …
  • Hard Disk Drives (HDD) …
  • Solid-State Drives (SSD) …
  • External HDDs and SSDs. …
  • Flash memory devices. …
  • Optical Storage Devices. …
  • Floppy Disks.

What is LUN size?

In simple terms, a logical unit number (LUN) is a slice or portion of a configured set of disks that is presentable to a host and mounted as a volume within the OS. … Any remaining capacity can then be ‘sliced’ into additional logical unit number (LUNs) as required.

What is the difference between LUN and volume?

Volumes contain file systems in a NAS environment and LUNs in a SAN environment. A LUN (logical unit number) is an identifier for a device called a logical unit addressed by a SAN protocol. LUNs are the basic unit of storage in a SAN configuration. The Windows host sees LUNs on your storage system as virtual disks.

Like this post? Please share to your friends:
OS Today