However, since the BIOS is a pre-boot environment, you can’t access it directly from within Windows. On some older computers (or those deliberately set to boot slowly), you can hit a function key such as F1 or F2 at power-on to enter the BIOS.
Can you get into the BIOS without restarting?
You’ll find it in the Start menu. As long as you are able to access your Windows desktop, you should be able to enter the UEFI/BIOS without worrying about pressing special keys at boot time. Entering the BIOS requires you to restart your PC.
How do I get into BIOS without operating system?
How do I get into BIOS without operating system?
- Press [key] to enter setup.
- Setup: [key]
- Enter BIOS by pressing [key]
- Press [key] to enter BIOS setup.
- Press [key] to access BIOS.
- Press [key] to access system configuration.
Can you just boot into BIOS?
Access the BIOS utility. Go to Advanced settings, and choose the Boot settings. Disable Fast Boot, save changes and restart your PC. Set your HDD as the primary booting device and confirm changes.
What happens when reset BIOS?
Resetting your BIOS restores it to the last saved configuration, so the procedure can also be used to revert your system after making other changes. Whatever situation you may be dealing with, remember that resetting your BIOS is a simple procedure for new and experienced users alike.
How can I enter BIOS if F2 key is not working?
If the F2 prompt doesn’t appear on the screen, you might not know when you should press the F2 key.
…
- Go to Advanced > Boot > Boot Configuration.
- In the Boot Display Config pane: Enable POST Function Hotkeys Displayed. Enable Display F2 to Enter Setup.
- Press F10 to save and exit BIOS.
How do I change BIOS settings?
How to enter the BIOS on a Windows 10 PC
- Navigate to Settings. You can get there by clicking the gear icon on the Start menu. …
- Select Update & Security. …
- Select Recovery from the left menu. …
- Click Restart Now under Advanced startup. …
- Click Troubleshoot.
- Click Advanced options.
- Select UEFI Firmware Settings. …
- Click Restart.
What key will you press to enter BIOS?
In order to access BIOS on a Windows PC, you must press your BIOS key set by your manufacturer which could be F10, F2, F12, F1, or DEL. If your PC goes through its power on self-test startup too quickly, you can also enter BIOS through Windows 10’s advanced start menu recovery settings.
How do I open BIOS on Windows 10?
To enter BIOS from Windows 10
- Click –> Settings or click New notifications. …
- Click Update & security.
- Click Recovery, then Restart now.
- The Options menu will be seen after executing the above procedures. …
- Select Advanced options.
- Click UEFI Firmware Settings.
- Choose Restart.
- This displays the BIOS setup utility interface.
How do I enter BIOS?
In order to access BIOS on a Windows PC, you must press your BIOS key set by your manufacturer which could be F10, F2, F12, F1, or DEL. If your PC goes through its power on self-test startup too quickly, you can also enter BIOS through Windows 10’s advanced start menu recovery settings.
How do I reset my BIOS to default?
Reset the BIOS to Default Settings (BIOS)
- Access the BIOS Setup utility. See Accessing BIOS.
- Press the F9 key to automatically load the factory default settings. …
- Confirm the changes by highlighting OK, then press Enter. …
- To save the changes and exit the BIOS Setup utility, press the F10 key.