The easiest way to add a route on Linux is to use the “ip route add” command followed by the network address to be reached and the gateway to be used for this route. By default, if you don’t specify any network device, your first network card, your local loopback excluded, will be selected.
Kedu otu m ga-esi jiri aka tinye ụzọ?
Iji iwu Tinye ụzọ iji aka tinye ụzọ ndabara maka interface netwọk nke ị gbakwunyere. Pịa Malite, pịa Run, pịnye cmd na igbe mepere emepe wee pịa OK. Pịnye ebipụta ụzọ, wee pịa ENTER ka ilele tebụl ntụgharị. Rịba ama ọnụọgụ interface nke interface netwọk nke ị gbakwunyere ọzọ.
What is Route Add command in Linux?
route command in Linux is used when you want to work with the IP/kernel routing table. It is mainly used to set up static routes to specific hosts or networks via an interface. It is used for showing or update the IP/kernel routing table.
Kedu otu m ga-esi tinye ụzọ kwụ ọtọ na Linux?
Otu esi ahazi Static routing na Linux
- Iji tinye "ụzọ tinye" n'ahịrị iwu: # ụzọ tinye -net 192.168.100.0 netmask 255.255.255.0 gw 192.168.10.1 dev eth0.
- Iji tinye iwu static ụzọ site na iji "ip ụzọ" iwu: # ip ụzọ tinye 192.168.100.0/24 site 192.168.10.1 dev eth1.
- Na-agbakwunye ụzọ kwụ ọtọ na-adịgide adịgide:
Kedu otu m ga-esi tinye ụzọ na Linux kpamkpam?
Na-agbakwunye ụzọ kwụ ọtọ na-adịgide adịgide
Na RHEL ma ọ bụ CentOS, ịkwesịrị ịme gbanwee faịlụ interface na '/etc/sysconfig/network-scripts'. Dịka ọmụmaatụ, ebe a, anyị ga-agbakwunye ụzọ na interface netwọk en192. N'ihi ya, faịlụ anyị kwesịrị ịgbanwe ga-abụ '/etc/sysconfig/network-scripts/route-ens192'.
Kedu otu esi etinye ụzọ?
Tinye a Static Route na Windows Routing Tebụl Ị nwere ike iji syntax ndị a:
- ụzọ ADD ebe_network MASK subnet_mask gateway_ip metric_cost.
- ụzọ tinye 172.16.121.0 nkpuchi 255.255.255.0 10.231.3.1.
- ụzọ -p tinye 172.16.121.0 nkpuchi 255.255.255.0 10.231.3.1.
- ụzọ hichapụ ebe_netwọk.
- ụzọ hichapụ 172.16.121.0.
Kedu otu esi etinye ụzọ na-adịgide adịgide?
Iji mee ka ụzọ ahụ na-adịgide adịgide tinye nhọrọ -p na iwu. Ọmụmaatụ: ụzọ -p tinye 192.168. 151.0 Mkpuchi 255.255.
Kedu ka m ga-esi abanye na Linux?
Tinye ụzọ na Linux site na iji ip. Ụzọ kachasị mfe iji tinye ụzọ na Linux bụ jiri iwu "IP route add" na-esote adreesị netwọk ga-eru na ọnụ ụzọ ámá nke a ga-eji mee njem a. Site na ndabara, ọ bụrụ na ịmaghị ngwaọrụ netwọkụ ọ bụla, a ga-ahọpụta kaadị netwọk mbụ gị, ewepụrụ loopback mpaghara gị.
Kedu ka m ga-esi lelee ụzọ na Linux?
Iji gosi tebụl ntụgharị kernel, ị nwere ike iji nke ọ bụla n'ime ụzọ ndị a:
- uzo. $ sudo ụzọ -n. Tebụlụ IP kernel. Ọnụ ụzọ ámá Genmask ọkọlọtọ Metric Ref Jiri Iface. …
- netstat. $ netstat -rn. Tebụlụ IP kernel. …
- ip. ndepụta ụzọ $ ip. 192.168.0.0/24 dev eth0 proto kernel scope njikọ src 192.168.0.103.
Gịnị bụ Route add Command?
Ka ịgbakwunye ụzọ:
- Ụdị ụzọ tinye 0.0. 0.0 nkpuchi 0.0. 0.0 , ebe bụ adreesị ọnụ ụzọ e depụtara maka ebe netwọk 0.0. 0.0 na Ọrụ 1. …
- Ụdị ping 8.8. 8.8 iji nwalee njikọ ịntanetị. The ping kwesịrị ịga nke ọma. …
- Mechie ngwa ngwa iwu iji mechaa ọrụ a.
Kedu ka m ga-esi gbanwee ụzọ na Linux?
ụdị. sudo ụzọ tinye ndabara gw adreesị IP . Dịka ọmụmaatụ, ịgbanwe ụzọ ndabara nke nkwụnye eth0 ka ọ bụrụ 192.168. 1.254, ị ga-pịnye ụzọ sudo tinye ndabara gw 192.168.
Kedu ihe bụ ip route Linux?
ụzọ ip a na-eji emegharị ndenye na kernel ntughari tebụl. Nsoro ụdị: unicast – na ụzọ ntinye na-akọwa ezigbo ụzọ na ebe ebe ndị ahụ kpuchiri ekpuchi ụzọ prefix. enweghị ike iru - ebe ndị a enweghị ike iru. A na-atụfu ngwugwu yana ndị nnabata ICMP enweghị ike iru ya.