A missing or outdated device driver in your computer can cause your SSD not detected by BIOS, especially your SSD driver and motherboard driver. So you should keep your device drivers up to date. … Then manually install it in your computer. Be sure to download the one that is compatible with your Windows OS.
How does an SSD appear in BIOS?
In most cases the SSD will be automatically detected by the BIOS. In some cases the BIOS will display the drive model number while in other cases it will only indicate the existence of a drive and its capacity.
Why is my drive not showing up in BIOS?
If your drive is not detected it may be because it is turned OFF in System Setup. Some motherboard manufactures disable unused ports in the BIOS by default. You will need to enter the the BIOS setup in order to verify their current state.
Why wont my SSD show up in setup?
If your SSD isn’t recognized by the BIOS when you attach it, check for these things: Check the SSD cable connection or switch another SATA cable. You can also connect it to an external USB adapter. Check if SATA port is enabled as sometimes the port is turned OFF in System Setup (BIOS).
What do I do if my SSD is not detected?
So, you can try to reinstall the SSD driver to check if this helps fix the issue.
- Step 1:Right-click on “This PC” and select “Manage”. Under the System Tools section, click “Device Manager”.
- Step 2:Go to Disk drives. …
- Step 3:Right-click the SSD and choose “Uninstall device”.
- Step 4:Remove the SSD and restart your system.
How do I fix SATA port not detected?
Quick Fix 1. Connect ATA/SATA Hard Drive with Another Cable Port
- Reconnect the hard drive with the data cable port or connect ATA/SATA hard drive to another new data cable in PC;
- Connect the hard drive with another desktop/laptop as a second HDD;
How do I enable SATA ports in BIOS?
To Set the System BIOS and Configure Your Disks for Intel SATA or RAID
- Power on the system.
- Press the F2 key at the Sun logo screen to enter the BIOS Setup menu.
- In the BIOS Utility dialog, select Advanced -> IDE Configuration. …
- In the IDE Configuration menu, select Configure SATA as and press Enter.
How do I fix BIOS not detecting hard drive?
Check if the hard drive is disabled in the BIOS
- Restart PC and enter system setup (BIOS) by pressing F2.
- Check and switch on hard drive detection in system configurations.
- Enable the auto-detection for future purpose.
- Reboot and check if the drive is detectable in BIOS.
How do I wipe my SSD from BIOS?
Here’s how to secure wipe an SSD from BIOS.
- Enter your system BIOS / UEFI settings.
- Look for your drive and select it. …
- Look for a Secure Erase or data wipe option. …
- Perform the Secure Erase or wipe procedure, following any pertinent prompts or instructions that may arise.
Where do you want to install Windows SSD not showing up?
However, if your SSD is not showing in BIOS, you should check the things below；
- Check the SSD cable connection. …
- Check if SATA port is enabled. …
- Connect the drive to another working computer to see if the SSD is damaged.
- Boot into BIOS, and set SATA to AHCI Mode.
Do I need to change BIOS settings for SSD?
For ordinary, SATA SSD, that’s all you need to do in BIOS. Just one advice not tied to SSDs only. Leave SSD as first BOOT device, just change to CD using fast BOOT choice (check your MB manual which F button is for that) so you don’t have to enter BIOS again after first part of windows installation and first reboot.
How do I install a new SSD?
How to install a solid-state drive for a desktop PC
- Step 1: Unscrew and remove the sides of your computer tower’s case to expose the internal hardware and wiring. …
- Step 2: Insert the SSD into the mounting bracket or a removable bay. …
- Step 3: Connect the L-shaped end of a SATA cable to the SSD.