If the external hard drive is not showing up in Windows 10, it may be caused by the incompatible file system format. If there is no data on the drive, you can right-click the partition on the drive in Disk Management and select Format to format the drive to NTFS. But this will lost all data.
How do I get Windows 10 to recognize my external hard drive?
Press Windows Key + X and choose Disk Management from the menu. Locate your portable hard drive in Disk Management and right-click it. Choose Change Drive Letter and Paths. A new window will appear showing you the current letter of your portable hard drive.
Why won’t windows see my external hard drive?
If the drive still isn’t working, unplug it and try a different USB port. It’s possible the port in question is failing, or just being finicky with your specific drive. If it’s plugged into a USB 3.0 port, try a USB 2.0 port. If it’s plugged into a USB hub, try plugging it directly into the PC instead.
What do I do when my external hard drive is not detected?
What to Do When Your External Hard Drive Won’t Show Up
- Make Sure It’s Plugged In and Powered On. …
- Try Another USB Port (or Another PC) …
- Update Your Drivers. …
- Enable and Format the Drive in Disk Management. …
- Clean the Disk and Start From Scratch. …
- Remove and Test the Bare Drive. …
- Our Favorite External Hard Drives.
How do I fix Windows not detecting my hard drive?
To check to see if this is the cause of the BIOS not detecting the hard drive, follow these steps:
- Power off the computer.
- Open the computer case and remove the data cable from the hard drive. This will stop any power saving commands from being sent.
- Turn on the system. Check to see if the hard drive is spinning.
Why won’t my hard drive show up on my PC?
If your new harddisk is not detected by or Disk Manager, it could be because of a driver issue, connection issue, or faulty BIOS settings. These can be fixed. Connection issues can be from a faulty USB port, or a damaged cable. Incorrect BIOS settings may cause the new hard drive to be disabled.
How do I fix my WD external hard drive not showing up on my computer?
Go Disk Management > Find your external hard drive and right click it by choosing Change Drive Letter and Path… Assign the drive with a new letter that doesn’t exist in your PC and mark the Partition as Active. Click OK. Restart PC and your External hard drive will show up and work again.
How can I recover data from external hard drive?
To recover deleted files from an external hard drive:
- Connect an external hard disk to your PC.
- Launch Disk Drill for Windows or Mac.
- Select your drive from the list.
- Click Search for lost data.
- Preview files that Disk Drill can retrieve.
- Select the files for recovery and click Recover all button.
Why is my TV not recognizing my external hard drive?
If your TV does not support the NTFS file format, but prefers the Fat32 format instead, then you will need to download a third party utility to convert your NTFS drive to Fat32 — since Windows 7 cannot do this natively. One go-to application that has worked well for us in the past is Fat32format.
How do you check if an external hard drive is working?
You can nevertheless run a manual disk check on an external hard drive via the CHKDSK utility. To launch this utility, right-click the drive in File Explorer and click “Properties.” Click the “Tools” tab, and then click “Check” to launch the CHKDSK utility, which automatically begins scanning the drive for errors.