How do I disable BIOS at startup?
Access the BIOS and look for anything that refers to turning on, on/off, or showing the splash screen (the wording differs by BIOS version). Set the option to disabled or enabled, whichever is opposite of how it is currently set. When set to disabled, the screen no longer appears.
What do I do if my computer is stuck in BIOS?
Solution 5: Clear the CMOS (BIOS)
- Turn off every peripheral device attached to the computer.
- Disconnect the system power cord from its AC power source.
- Remove the computer case cover.
- Find the CMOS battery on the motherboard. …
- Remove the CMOS battery. …
- Wait for between 1–5 minutes.
- Reinsert the battery.
Why is my laptop stuck on BIOS screen?
Go to the BIOS settings of the computer that’s stuck on the BIOS screen. Change the boot order to let the computer from a USB drive or CD/DVD. … Reboot your faulty computer; you will now be able to gain access. Also, plugin an external drive that you can use as storage for the data you are about to recover.
Why is my computer stuck booting up?
Software glitches, faulty hardware or removable media connected to your computer can sometimes cause the computer to hang and become unresponsive during the startup process. You can use a selection of troubleshooting techniques to fix the problem and get your computer starting normally.
How do I bypass UEFI BIOS utility?
Enter UEFI Setup to enable CSM or Legacy BIOS. Press “Del” when the ASUS logo appears on the screen to enter the BIOS. Press “Ctrl-Alt-Del” to restart the computer if the PC boots to Windows before loading the setup program. If this fails then I would reinstall to avoid future problems.
Why is my computer stuck on boot menu?
A problem in the Windows operating system can also cause the system stuck on the boot menu. Sometimes, a virus or malicious program corrupts the Windows operating system files that cause the system to stuck on the boot menu.
How do I remove a BIOS password?
On the computer motherboard, locate the BIOS clear or password jumper or DIP switch and change its position. This jumper is often labeled CLEAR, CLEAR CMOS, JCMOS1, CLR, CLRPWD, PASSWD, PASSWORD, PSWD or PWD. To clear, remove the jumper from the two pins currently covered, and place it over the two remaining jumpers.
How do I disable BIOS memory?
Restart the computer, and press the F2 or Del key to get into the BIOS. Then go to Advanced Section, and look for the memory option. It is commonly marked as Caching or Shadowing. Please turn it off, and restart the computer.
Why is my computer stuck on the Windows screen?
In some cases, the “Windows stuck on loading screen” issue is caused by Windows updates or other problems. At this time, you can enter the Safe Mode, do nothing, and then reboot your computer to help the computer start normally again. Safe Mode starts with a minimum set of drivers, software, and service.
How do I adjust BIOS settings?
How to Configure the BIOS Using the BIOS Setup Utility
- Enter the BIOS Setup Utility by pressing the F2 key while the system is performing the power-on self-test (POST). …
- Use the following keyboard keys to navigate the BIOS Setup Utility: …
- Navigate to the item to be modified. …
- Press Enter to select the item.
Why can’t I exit BIOS?
If you can’t exit BIOS on your PC, the issue is most likely caused by your BIOS settings. … Enter BIOS, go to Security Options and disable Secure Boot. Now save changes and restart your PC. Enter BIOS again and this time go to Boot section.