If configured, the IOS prompts the user to enter the password to access this mode. This mode has very limited commands that allow the user to view statistics and perform basic troubleshooting.
What are the two types of configuration mode in Cisco IOS?
There are two types of configuration files: the running (current operating) configuration and the startup (last saved) configuration. The running configuration is stored in RAM; the startup configuration is stored in NVRAM. To display the current running configuration, enter the show running-config command.
What are the four IOS modes of Cisco devices?
Four Modes to Access and Configure a Cisco Router
- Cisco IOS Command Summary—Four Modes to Access and Configure a Cisco Router.
- The four modes for accessing and configuring a Cisco router are: user EXEC mode, privileged EXEC mode, global configuration mode, interface configuration mode.
- Exiting Modes.
What is the command for privileged EXEC mode?
To enter privileged EXEC mode, enter the enable command. Privileged EXEC From user EXEC mode, enter the enable command.
What is another name for enable mode?
What is another name for enable mode? Privileged EXEC mode. What command is used to erase the configuration file on a Cisco router? erase startup config.
What is Router modes?
There are four operating modes in the router settings — the main mode and three additional modes: Router (A) — main mode; Adapter (B) — connect Ethernet devices to a Wi-Fi network; … Access point/Extender (D) — expansion of the Wi-Fi area with Ethernet connection.
Which IOS mode allows access to all commands?
Primary Command Modes
| Command Mode | Description | Default Device Prompt |
|---|---|---|
| Privileged EXEC Mode | Mode allows access to all commands and features. The user can use any monitoring commands and execute configuration and management commands. | Switch# Router# |
What are the 4 modes of router?
Cisco Router modes
- User execution mode – As soon as the interface up message appears and press enter, the router> prompt will pop up. …
- Privileged mode – …
- Global configuration mode – …
- Interface configuration mode – …
- ROMMON mode –
What is privileged mode?
Supervisor mode or privileged mode is a computer system mode in which all instructions such as privileged instructions can be performed by the processor. Some of these privileged instructions are interrupt instructions, input output management etc.