How do I update BIOS on Surface Pro?

Contents

How do I get into the BIOS on a Surface Pro?

Access Surface Pro BIOS

Make sure the Surface Pro device is turned off.
Hold the volume-up button.
Press and release the power button.
When the Surface logo appears, release the volume-up button.
The Surface UEFI firmware interface screen will be displayed and you can make changes.

How do I update my Surface UEFI?

Press and hold the Volume-up button and – at the same time – press and release the Power button. As the Microsoft or Surface logo appears on your screen, continue to hold the Volume-up button until the UEFI screen appears.

How do I reset my Surface Pro BIOS?

Here’s how:

On your keyboard, press the Windows logo key + L. If you need to, dismiss the lock screen.
Hold the Shift key down while you select Power > Restart in the lower-right corner of the screen.
After your Surface restarts to the Choose an option screen, select Troubleshoot > Reset this PC.

How do I force update my Surface Pro?

Run the Windows Update troubleshooter

Select Start > Settings > Update & Security . On the left side, select Troubleshoot . Under Get up and running, select Windows Update .

How do I get out of BIOS utility?

Press the F10 key to exit the BIOS setup utility. In the Setup Confirmation dialog box, press the ENTER key to save the changes and exit.

How do I get out of Surface UEFI screen?

If you can’t shut down Surface normally, press and hold the power button on your Surface for 30 seconds. Step 2: After Surface turns off, press and hold volume-up button and the power button on your Surface at the same time for at least 15 seconds, and then release both.

How do you update firmware?

Installing firmware or BIOS updates in Windows 10

Search for and open Device Manager.
Expand Firmware.
Double-click System Firmware.
Select the Driver tab.
Click Update Driver.
Click Search automatically for updated driver software.
Wait for the update to download and then follow the instructions.

How do I manually update my Surface Pro 3 firmware?

You can get this new Firmware Update by:

Go to Start > Settings > Update & security > Windows Update.
Click on Check for updates.

Once Surface has turned off, press and hold the volume-up button. With the volume-up button held down, press and release the power button. Continue holding the volume-up button until the Surface or Windows logo no longer appears on the screen. You should now see the Surface UEFI.

How do I boot a Surface Pro into recovery mode?

If you cannot sign into your system, you can restore your system in the Windows Recovery Environment.

On the Windows sign in screen, select Power .
Press and hold Shift and Alt Keys and select Restart .
You would see Choose an option screen. …
Go to Advanced Options > System Restore .
Enter a recovery key, if asked.

How do you do a hard reset on a Surface Pro?

Press and hold the volume-up button and the power button at the same time until the screen turns off (about 15 seconds), then release both. The screen may flash the Surface logo, but continue holding the buttons down for at least 15 seconds. After you release the buttons, wait 10 seconds.