Press the F10 key to exit the BIOS setup utility.
Where is BIOS setup utility?
Access the BIOS Setup Utility using a series of key presses during the boot process.
- Turn off the computer and wait five seconds.
- Turn on the computer, and then immediately press the esc key repeatedly until the Startup Menu opens.
- Press f10 to open the BIOS Setup Utility.
How do I exit UEFI utility?
The Fn keys can be used to issue commands to the UEFI (BIOS). Try pressing F1 and see if it brings up a list of Fn associated commands. Look for “Quit Without Saving Changes”, and press that Fn key. That should get you out of the UEFI and force a re-boot.
How do I get into BIOS screen?
Get ready to act quickly: You need to start the computer and press a key on the keyboard before the BIOS hands over control to Windows. You have only a few seconds to perform this step. On this PC, you’d press F2 to enter the BIOS setup menu. If you don’t catch it the first time, simply try again.
How do I fix BIOS settings?
How to reset BIOS settings on Windows PCs
- Navigate to the Settings tab under your Start menu by clicking the gear icon.
- Click the Update & Security option and select Recovery from the left sidebar.
- You should see a Restart now option below the Advanced Setup heading, click this whenever you’re ready.
How do I get to BIOS setup utility in Windows 10?
How to enter the BIOS on a Windows 10 PC
- Navigate to Settings. You can get there by clicking the gear icon on the Start menu. …
- Select Update & Security. …
- Select Recovery from the left menu. …
- Click Restart Now under Advanced startup. …
- Click Troubleshoot.
- Click Advanced options.
- Select UEFI Firmware Settings. …
- Click Restart.
How do I select boot options?
Generally, the steps go like this:
- Restart or turn on the computer.
- Press the key or keys to enter the Setup program. As a reminder, the most common key used to enter the Setup program is F1. …
- Choose the menu option or options to display the boot sequence. …
- Set the boot order. …
- Save the changes and exit the Setup program.
How do I get out of UEFI BIOS utility EZ mode?
Try the following and see if it resolves the problem:
- In the Aptio Setup Utility, select the “boot” menu and then select “Launch CSM” and change it to “enable”.
- Next select the “Security” menu and then select “secure Boot Control” and change to “disable”.
- Now select “Save & Exit” and press “yes”.
How do I reset my BIOS to factory settings?
Reset from Setup Screen
- Shut your computer down.
- Power your computer back up, and immediately press the key that enters the BIOS setup screen. …
- Use the arrow keys to navigate through the BIOS menu to find the option to reset the computer to its default, fall-back or factory settings. …
- Restart your computer.