How do I check my BIOS settings?
Finding the BIOS Version on Windows Computers Using the BIOS Menu
- Restart the computer.
- Open the BIOS menu. As the computer reboots, press F2, F10, F12, or Del to enter the computer BIOS menu. …
- Find the BIOS version. In the BIOS menu, look for BIOS Revision, BIOS Version, or Firmware Version.
How do I enter BIOS on Windows 10?
To enter BIOS from Windows 10
- Click –> Settings or click New notifications. …
- Click Update & security.
- Click Recovery, then Restart now.
- The Options menu will be seen after executing the above procedures. …
- Select Advanced options.
- Click UEFI Firmware Settings.
- Choose Restart.
- This displays the BIOS setup utility interface.
How do I fix BIOS at startup?
If you know the correct setting, follow these steps:
- Shut down the computer and restart it.
- Start the BIOS or UEFI firmware setup program.
- Change the SATA setting to the correct value.
- Save settings and restart the computer.
- Select Start Windows Normally if prompted.
How do I change BIOS settings?
How Do I Completely Change the BIOS on My Computer?
- Restart your computer and look for the keys–or combination of keys–you must press to access your computer’s setup, or BIOS. …
- Press the key or combination of keys to access your computer’s BIOS.
- Use the “Main” tab to change the system date and time.
How do I know if my BIOS is disabled?
If you have Windows 10 or Windows 8 operating system, the easiest way to check is by opening up Task Manager->Performance Tab. You should see Virtualization as shown in the below screenshot. If it is enabled, it means that your CPU supports Virtualization and is currently enabled in BIOS.
What key do you press to enter BIOS?
Here’s a list of common BIOS keys by brand. Depending on the age of your model, the key may be different.
…
BIOS Keys by Manufacturer
- ASRock: F2 or DEL.
- ASUS: F2 for all PCs, F2 or DEL for Motherboards.
- Acer: F2 or DEL.
- Dell: F2 or F12.
- ECS: DEL.
- Gigabyte / Aorus: F2 or DEL.
- HP: F10.
- Lenovo (Consumer Laptops): F2 or Fn + F2.
How do I boot directly into BIOS?
In order to access BIOS on a Windows PC, you must press your BIOS key set by your manufacturer which could be F10, F2, F12, F1, or DEL. If your PC goes through its power on self-test startup too quickly, you can also enter BIOS through Windows 10’s advanced start menu recovery settings.
How do I boot into Windows BIOS?
To boot to UEFI or BIOS:
- Boot the PC, and press the manufacturer’s key to open the menus. Common keys used: Esc, Delete, F1, F2, F10, F11, or F12. …
- Or, if Windows is already installed, from either the Sign on screen or the Start menu, select Power ( ) > hold Shift while selecting Restart.
How do I boot into BIOS without rebooting?
However, since the BIOS is a pre-boot environment, you can’t access it directly from within Windows. On some older computers (or those deliberately set to boot slowly), you can hit a function key such as F1 or F2 at power-on to enter the BIOS.
How do I reset my BIOS to default?
Reset the BIOS to Default Settings (BIOS)
- Access the BIOS Setup utility. See Accessing BIOS.
- Press the F9 key to automatically load the factory default settings. …
- Confirm the changes by highlighting OK, then press Enter. …
- To save the changes and exit the BIOS Setup utility, press the F10 key.
How do I fix a corrupted BIOS?
You can do this one of three ways:
- Boot into the BIOS and reset it to the factory settings. If you are able to boot into the BIOS, go ahead and do so. …
- Remove the CMOS battery from the motherboard. Unplug your computer and open your computer’s case to access the motherboard. …
- Reset the jumper.