In order to access BIOS on a Windows PC, you must press your BIOS key set by your manufacturer which could be F10, F2, F12, F1, or DEL. If your PC goes through its power on self-test startup too quickly, you can also enter BIOS through Windows 10’s advanced start menu recovery settings.
How do I enter BIOS on Windows 10?
How to enter the BIOS on a Windows 10 PC
- Navigate to Settings. You can get there by clicking the gear icon on the Start menu. …
- Select Update & Security. …
- Select Recovery from the left menu. …
- Click Restart Now under Advanced startup. …
- Click Troubleshoot.
- Click Advanced options.
- Select UEFI Firmware Settings. …
- Click Restart.
How do I get into BIOS?
To access your BIOS, you’ll need to press a key during the boot-up process. This key is often displayed during the boot process with a message “Press F2 to access BIOS”, “Press to enter setup”, or something similar. Common keys you may need to press include Delete, F1, F2, and Escape.
How do I open the boot menu in Windows 10?
I – Hold the Shift key and restart
This is the easiest way to access Windows 10 boot options. All you need to do is hold down the Shift key on your keyboard and restart the PC. Open up the Start menu and click on “Power” button to open power options.
How can I enter BIOS if F2 key is not working?
If the F2 prompt doesn’t appear on the screen, you might not know when you should press the F2 key.
…
- Go to Advanced > Boot > Boot Configuration.
- In the Boot Display Config pane: Enable POST Function Hotkeys Displayed. Enable Display F2 to Enter Setup.
- Press F10 to save and exit BIOS.
How do I reset my BIOS to default?
Reset the BIOS to Default Settings (BIOS)
- Access the BIOS Setup utility. See Accessing BIOS.
- Press the F9 key to automatically load the factory default settings. …
- Confirm the changes by highlighting OK, then press Enter. …
- To save the changes and exit the BIOS Setup utility, press the F10 key.
How do I fix BIOS not booting?
If you cannot enter the BIOS setup during boot, follow these steps to clear the CMOS:
- Turn off all peripheral devices connected to the computer.
- Disconnect the power cord from the AC power source.
- Remove the computer cover.
- Find the battery on the board. …
- Wait one hour, then reconnect the battery.
Why is my BIOS not showing up?
You may have selected the quick boot or the boot logo settings accidentally, which replaces the BIOS display to make the system boot faster. I’d most probably try to clear the CMOS battery (removing it and then putting it back in).
How do you force a computer to start?
Use the power button
- Locate your computer’s Power button.
- Press and hold that button until your computer shuts down.
- Wait until you hear the computer’s fans shut off, and your screen goes completely black.
- Wait a few seconds before pressing and holding the power button to initiate your computer’s normal startup.
Can’t access BIOS setup Windows 10?
Configuring the BIOS in Windows 10 to solve ‘Can’t Enter BIOS’ Issue:
- Start with navigating to the settings. …
- You then have to select Update and Security.
- Move to ‘Recovery’ from the left menu.
- You then have to click on ‘Restart’ under the advanced startup. …
- Choose to troubleshoot.
- Move to the advanced options.