Launch the QNAP Qfinder. Select the NAS detected and then click “Tool” > “Map Network Drive”. Select a shared folder on the NAS to be mapped as a network drive and click “Map Network Drive”. Enter the username and password to connect to the NAS and click “OK”.
How do I access QNAP on my computer?
Connect Qnap directly to a PC over LAN
- Make sure that the 2 devices are in the same IP subnet. For example: PC 1 IP address: 192.168.0.1 , subnet: 255.255.255.0. NAS Drive ip address: 192.168.0.2 , subnet: 255.255.255.0. …
- Discover your NAS Through the Qfinder Pro discovery tool.
Can I connect my QNAP directly to my computer?
If you are planning to connect your Qnap NAS to your PC over USB, then no, you can not no it with every model (just few). NAS means network attached storage and is being connected to a network. … If you want to connect your NAS directly, you can do it. Set up manual IP on your PC and NAS with a one in the same IP range.
How do I connect QNAP NAS to my laptop?
Procedure
- Connect the NAS to your PC/Mac with a direct ethernet cable. You may use any of the available LAN port on the NAS.
- Set your PC/Mac to IP address 169.254.100.99 and submask 255.255.0.0. …
- Run Qfinder on your computer. …
- Try if you can ping NAS IP.
- Try if you can see QTS web interface.
How do I access my NAS drive?
Business Storage Windows Server NAS – How to Access with Remote Desktop
- Press the Windows key ( …
- Press the Start button.
- In the Search files and folders field, type the following: …
- Open the Remote Desktop Connection application.
- Enter the IP address of the NAS device, then click Connect. …
- For the user, enter: Administrator.
How do I connect my NAS drive to my PC?
Business Storage Windows Server NAS – How to Access with Remote Desktop
- Press the Windows key ( …
- Press the Start button.
- In the Search files and folders field, type the following: …
- Open the Remote Desktop Connection application.
- Enter the IP address of the NAS device, then click Connect. …
- For the user, enter: Administrator.
How do I connect QNAP NAS to Windows?
Launch the QNAP Qfinder. Select the NAS detected and then click “Tool” > “Map Network Drive“. Select a shared folder on the NAS to be mapped as a network drive and click “Map Network Drive”. Enter the username and password to connect to the NAS and click “OK”.
How do I connect QNAP to my home network?
How to set up and connect to your QNAP NAS
- Turn on the NAS.
- Look up the IP using your router or download QNAP Qfinder Pro to search.
- Load the IP address in your favorite browser.
- Follow the initial setup wizard to configure the NAS. Source: QNAP.
- Once complete, you’ll be greeted by QTS and are ready to go.
How do I access NAS locally?
Here’s how:
- Turn on the NAS.
- Wait for the unit to complete its boot sequence.
- Fire up your web browser and enter find.synology.com or the IP of the enclosure. …
- You should now be greeted by the DSM install wizard. …
- Follow the steps to initialize the drives, install DSM, and set up your accounts.
How do I remotely access QNAP NAS?
Get started
- Register your unique myQNAPcloud account (QID) in the QNAP account center.
- Install myQNAPcloud Link App from the QTS App Center and sign in with your myQNAPcloud ID (QID).
- Use the SmartURL to access your NAS by logging in with your device account and password.
Why can’t I see my NAS on the network Windows 10?
If you’re still unable to see/access the NAS device on Windows 10, try accessing it from a working Windows 8 or lower version of the Windows system on the same network as NAS. If the NAS device is still invisible, there might be some issues with your NAS device. In such a case, your data on NAS disks might be at risk.
Does a NAS have to be connected to a router?
Tip: While most NAS devices require an Ethernet connection to your network router, some models offer built-in Wi-Fi wireless connectivity and don’t need to be physically connected to a router. Do I need to be a computer professional to install a NAS? Not at all.
How do I remotely access my DiskStation?
To get started, fire up DiskStation Manager, and then open up Control Panel. In the Control Panel window, click the “QuickConnect” setting. Click the “Enable QuickConnect” check box to enable the feature. Next, click the “Log in to or register a Synology account” option.