Frequent question: Can’t exit BIOS screen?

If you can’t exit BIOS on your PC, the issue is most likely caused by your BIOS settings. … Enter BIOS, go to Security Options and disable Secure Boot. Now save changes and restart your PC. Enter BIOS again and this time go to Boot section.

How do I force quit BIOS?

Press the F10 key to exit the BIOS setup utility. In the Setup Confirmation dialog box, press the ENTER key to save the changes and exit.

How do I get out of BIOS utility EZ mode?

webworkings

1. In the Aptio Setup Utility, select the “boot” menu and then select “Launch CSM” and change it to “enable”.
2. Next select the “Security” menu and then select “secure Boot Control” and change to “disable”.
3. Now select “Save & Exit” and press “yes”.

How do I adjust BIOS settings?

How to Configure the BIOS Using the BIOS Setup Utility

1. Enter the BIOS Setup Utility by pressing the F2 key while the system is performing the power-on self-test (POST). …
2. Use the following keyboard keys to navigate the BIOS Setup Utility: …
3. Navigate to the item to be modified. …
4. Press Enter to select the item.

How do I bypass BIOS on startup?

Access the BIOS and look for anything that refers to turning on, on/off, or showing the splash screen (the wording differs by BIOS version). Set the option to disabled or enabled, whichever is opposite of how it is currently set. When set to disabled, the screen no longer appears.

Why is my computer stuck on the Windows screen?

In some cases, the “Windows stuck on loading screen” issue is caused by Windows updates or other problems. At this time, you can enter the Safe Mode, do nothing, and then reboot your computer to help the computer start normally again. Safe Mode starts with a minimum set of drivers, software, and service.

How do I fix BIOS problems?

Fixing 0x7B Errors at Startup

1. Shut down the computer and restart it.
2. Start the BIOS or UEFI firmware setup program.
3. Change the SATA setting to the correct value.
4. Save settings and restart the computer.
5. Select Start Windows Normally if prompted.

How do I bypass UEFI BIOS utility?

Enter UEFI Setup to enable CSM or Legacy BIOS. Press “Del” when the ASUS logo appears on the screen to enter the BIOS. Press “Ctrl-Alt-Del” to restart the computer if the PC boots to Windows before loading the setup program. If this fails then I would reinstall to avoid future problems.

How do I get out of UEFI mode?

How do I disable UEFI Secure Boot?

1. Hold down the Shift key and click Restart.
2. Click Troubleshoot → Advanced options → Start-up Settings → Restart.
3. Tap the F10 key repeatedly (BIOS setup), before the “Startup Menu” opens.
4. Go to Boot Manager and disable the option Secure Boot.

How do you reset BIOS?

Reset the BIOS to Default Settings (BIOS)

1. Access the BIOS Setup utility. See Accessing BIOS.
2. Press the F9 key to automatically load the factory default settings. …
3. Confirm the changes by highlighting OK, then press Enter. …
4. To save the changes and exit the BIOS Setup utility, press the F10 key.