Why is there no sound on my computer Windows 8?

Try Windows Troubleshooter. Check the Sound Settings. … Uninstall Sound Driver from Device Manager and Restart (Windows will attempt to reinstall the driver, if not, try the next step) Update Sound Driver from Device Manager.

How do I get my sound back on Windows 8?

Move the mouse pointer to the lower left corner of the screen, right-click, and select Control Panel from the menu. Click Hardware and Sound. Under Sound, click Adjust system volume. Make sure the volume is not muted by looking at the square Mute buttons below the volume slider.

Why does my computer suddenly have no sound?

Restart or change your audio device

The reason there is no sound on your computer could be that it needs a simple restart. Keep trying different audio devices and see which one provides your computer with sound. It may be that Windows 10 is directing audio to the wrong output device.

What to do if Windows 8 is not working?

Table of Contents:

1. Operating System.
2. Specific Windows 8 No Boot Issues.
3. Verify the Computer Finishes Initial Power-Up (POST)
4. Unplug All External Devices.
5. Check for Specific Error Messages.
6. Reset the BIOS to Default Values.
7. Run a Computer Diagnostic.
8. Boot Computer to Safe Mode.

How do I restore the Sound on my computer?

Open the “Sounds and Audio Device Properties” screen from the Control Panel. Click on the “Hardware” tab and select your sound card. Click the “Troubleshoot…” button and follow the on-screen prompts to diagnose and repair your problem.

Why is my audio not working on my laptop?

Outdated or malfunctioning drivers can also cause audio and other hardware problems. Check that your audio driver is updated, and if not, update it. You can also uninstall it and it’ll automatically reinstall on your computer, use the generic Windows audio driver or try and roll back the audio driver.

Why is my iPhone’s sound not working?

Go to Settings > Sounds (or Settings > Sounds & Haptics), and drag the Ringer and Alerts slider back and forth a few times. If you don’t hear any sound, or if your speaker button on the Ringer and Alerts slider is dimmed, your speaker might need service. Contact Apple Support for iPhone, iPad, or iPod touch.

Why is no sound coming from my speakers?

Check the speaker connections. Examine the wires on the back of your speaker and make sure your speakers are plugged into the proper location. If any of these connections are loose, plug them back in to secure the connection. A loose connection could be the reason you have a speaker with no sound.

How do I access my sound card settings?

Configuring Sound and Audio Devices

1. Choose Start > Control Panel > Hardware and Sound > Sound > Playback tab. or. …
2. Right-click a device in the list and choose a command to configure or test the device, or to inspect or change its properties (Figure 4.33). …
3. When you’re done, click OK in each open dialog box.

How do I change audio settings on Windows 8?

System is Operating as Designed

1. Right-click on the Start button, then left-click on Control Panel.
2. Click hardware and sound, then Manage Audio devices in the Sound section, The sound window opens.
3. Click Speakers, then click Set Default, then OK, and close the control panel window.

How do I connect my speakers to Windows 8?

How to Install or Set Up Speakers in Windows 8

1. From the desktop, right-click your taskbar’s Speaker icon and choose Playback Devices.
2. Click your speaker or speaker’s icon and then click the Configure button. …
3. Click the Test button, adjust your speaker’s settings, and click Next.

How do I fix my Windows 8 laptop wont turn on?

This is actually a very simple step that usually solves problems like No Power Issues and Blank Screens.

1. Remove the battery and then disconnect the AC adapter if connected.
2. Press and hold down the power button for 15 seconds then release it.
3. Reinsert the battery and then reconnect the AC adapter.
4. Turn on the computer.

How do I fix Windows 8 not booting?

Fixes if Windows 8 won’t start

1. Insert the installation media, the DVD or the USB, and boot from it.
2. Click Repair your computer. Windows 8 Repair Your Computer Menu.
3. Click Troubleshoot.
4. Click Advanced options.
5. Click Command Prompt.
6. Type: bootrec /FixMbr.
7. Press Enter.
8. Type: bootrec /FixBoot.

How do I get to the boot menu in Windows 8?

F12 key method

1. Turn the computer on.
2. If you see an invitation to press the F12 key, do so.
3. Boot options will appear along with the ability to enter Setup.
4. Using the arrow key, scroll down and select <Enter Setup>.
5. Press Enter.
6. The Setup (BIOS) screen will appear.
7. If this method does not work, repeat it, but hold F12.