This BIOS feature determines if the BIOS should hide the normal POST messages with the motherboard or system manufacturer’s full-screen logo. When it is enabled, the BIOS will display the full-screen logo during the boot-up sequence, hiding normal POST messages.
How do I turn off quiet boot?
Scroll down in the main screen and select Quiet Boot -> Disabled, then press F10 to save and exit.
How do I turn off quiet boot in BIOS?
Follow these steps to disable the Intel or OEM logo screen:
- Press F2 during boot, when the logo screen first displays.
- On the Main tab, change Quiet Boot from Enabled to Disabled.
- Go back to the top-level tabs. …
- Select Save Changes and Exit to boot the system with the changes saved.
Should I turn off quiet Boot?
This delay ensures that the logo is displayed for a sufficient amount of time. Therefore, it is recommended that you disable this BIOS feature for a faster boot-up time.
What is a quiet Boot?
Quiet Boot feature details
Consolidates boot information to one page. Is turned on by default. Performs faster on serial terminals.
What is network Boot in BIOS?
Network booting, shortened netboot, is the process of booting a computer from a network rather than a local drive. … Network booting can be used to centralize management of disk storage, which supporters claim can result in reduced capital and maintenance costs.
What is Boot Numlock?
Windows 10 allows you to quickly sign in with a numeric PIN instead of a longer password. if you have a keyboard with a number pad, you can use that number pad to enter the PIN–after you enable Num Lock. … You may have an option to enable “Num Lock at Boot” in your BIOS or UEFI settings screen to do this.
What is UEFI mode?
The Unified Extensible Firmware Interface (UEFI) is a publicly available specification that defines a software interface between an operating system and platform firmware. … UEFI can support remote diagnostics and repair of computers, even with no operating system installed.
What should be the boot priority order?
About Boot Priority
- Start the computer and press ESC, F1, F2, F8, F10 or Del during the initial startup screen. …
- Choose to enter BIOS setup. …
- Use the arrow keys to select the BOOT tab. …
- To give a CD or DVD drive boot sequence priority over the hard drive, move it to the first position in the list.
Should I turn on fast startup?
Leaving fast startup enabled shouldn’t harm anything on your PC — it’s a feature built into Windows — but there are a few reasons why you might want to nevertheless disable it. … Finally, Windows 10 updates might not install properly if you have fast startup enabled.
How do I use secure boot?
More information about Secure Boot
- Go to Start.
- In the search bar, type msinfo32 and press enter.
- System Information opens. Select System Summary.
- On the right-side of the screen, look at BIOS Mode and Secure Boot State. If Bios Mode shows UEFI, and Secure Boot State shows Off, then Secure Boot is disabled.
What does onboard LAN boot ROM mean?
Onboard LAN Boot ROM: Contrary to what you might have guessed, this setting doesn’t refer to booting your PC remotely via the LAN port. Instead, this is intended for newer Gigabit LAN ports to operate at their full 1Gbps speed when using an older OS by loading the LAN controller’s boot ROM during boot.
What is setup prompt timeout?
Number of seconds to wait for the setup activation key. 65535. (0xFFFF) means indefinite waiting.