Access the BIOS and look for anything that refers to turning on, on/off, or showing the splash screen (the wording differs by BIOS version). Set the option to disabled or enabled, whichever is opposite of how it is currently set. When set to disabled, the screen no longer appears.
How do I restrict BIOS?
To lock down the BIOS, follow these steps:
- On boot, press [F2] to access the BIOS setup.
- Under System, select Boot Sequence.
- Make sure the Internal HDD is the only device with a number beside it.
- Press [Esc], and select Save.
- Under Security, elect Admin Password.
- Set an admin password.
Why do I keep getting put in BIOS?
If your computer keeps booting to BIOS, the issue may be triggered by the incorrect boot order. Just go to check if there is an appropriate boot device available in BIOS. If you find it, set the disk as the primary boot option. If your hard drive listed under boot device cannot be found in BIOS, change this hard disk.
How do I disable BIOS splash screen?
How do I disable the Windows loading splash screen?
- Press the Windows key , type msconfig, and then press Enter .
- Click the Boot tab. If you do not have a Boot tab, skip to the next section.
- On the Boot tab, check the box next to No GUI boot.
- Click Apply and then OK.
What is UEFI mode?
The Unified Extensible Firmware Interface (UEFI) is a publicly available specification that defines a software interface between an operating system and platform firmware. … UEFI can support remote diagnostics and repair of computers, even with no operating system installed.
What can I do if my PC automatically goes to BIOS?
If your computer keeps booting to BIOS, you should check the hardware connection.
…
What can I do if my PC automatically goes to BIOS?
- Check the hardware connection. …
- Disable Fast Boot and set your system drive as the primary option. …
- Move your BCD store. …
- Run the Windows Repair tool.
What does fast boot do in BIOS?
Fast Boot is a feature in BIOS that reduces your computer boot time. If Fast Boot is enabled: Boot from Network, Optical, and Removable Devices are disabled. Video and USB devices (keyboard, mouse, drives) won’t be available until the operating system loads.
How do I get out of BIOS loop?
Unplug power cable from PSU. Press the power button for 20 seconds. Remove the CMOS battery and wait 5 minutes and insert CMOS battery back. Make sure to connect only the disk where Windows was installed…if you installed Windows while having only one disk on your PC.
What is full screen logo in BIOS?
Full Screen LOGO Show Allows you to determine whether to display the GIGABYTE Logo at system startup. Disabled displays normal POST message. ( Default: Enabled.
How do I enter BIOS?
In order to access BIOS on a Windows PC, you must press your BIOS key set by your manufacturer which could be F10, F2, F12, F1, or DEL. If your PC goes through its power on self-test startup too quickly, you can also enter BIOS through Windows 10’s advanced start menu recovery settings.