Frequent question: How do I find the QLogic HBA firmware version in Linux?

You can use the “systool” command or else the file “/sys/class/scsi_host/host0/firmware_version” to check the firmware version of your Brocade FC HBA.

How do I find the QLogic HBA firmware version in vmware?

Hello, as you probably know the only way to find out about HBA firmware and driver versions these days is by running:

  1. /usr/lib/vmware/vmkmgmt_keyval/vmkmgmt_keyval -d to see which are the HBA devices, then.
  2. /usr/lib/vmware/vmkmgmt_keyval/vmkmgmt_keyval -l -i vmhba1/qlogic to actually retrieve the needed info for a hba.

How do I find my HBA model?

How to check the HBA name, make, model, firmware, driver version in Linux

  1. # lspci -nn | grep -i Fibre. 04:00.2 Fibre Channel [0c04]: Emulex Corporation OneConnect 10Gb FCoE Initiator (be3) [19a2:0714] (rev 01) …
  2. # grep -v “zZzZ” /sys/class/scsi_host/host*/model*

How do I find my HBA number in Linux?

How to find WWN number of HBA and scan the FC Luns in LINUX

  1. Identify the number of HBA adapters.
  2. To get the WWNN (World Wide Node Number) of HBA or FC card in Linux.
  3. To get the WWPN (World Wide Port Number) of HBA or FC card in Linux.
  4. Scan the newly added or rescan the existing LUNs in Linux.

How do I update my QLogic firmware?

To update the firmware, go to the ProtecTIER Service menu (see ProtecTIER Service menu for the TS7650 Appliance or TS7650G (Gateway), ProtecTIER V3. 3.6) and, select ProtecTIER Configuration > Update Firmware. After the firmware update is complete, type the command reboot .

How do I find my HBA firmware version on Windows?

Steps

  1. Open the Computer Management window. For. …
  2. Double-click Device Manager. A list of installed devices displays. …
  3. Expand Storage controllers and double-click the appropriate HBA. The Properties dialog box for the HBA is displayed.
  4. Click Driver. …
  5. Obtain the latest supported version from the Emulex or QLogic website.

How do I find my HBA details in AIX?

Task 1 : Check how many fiber change adapters are there on the Server with below command

  1. Task 1 : Check how many fiber change adapters are there on the Server with below command.
  2. lsdev -Cc adapter.
  3. Example.
  4. um_lpar:/>lsdev -Cc adapter. …
  5. um_lpar:/>lsdev -Cc adapter |grep fcs.

How do I reset HBA?

HBA reset on Linux System

  1. Determine if the driver supports resetting the HBA.
  2. Verify the driver parameter is configured as needed.
  3. This parameter is enabled by default:
  4. The actual reset parameter is available under scsi_host class within sysfs:
  5. Reset the HBA via the SCSI host/driver:

How do I replace my HBA card in Linux?

Planning Steps:

  1. Locate the failed HBA adapter on the physical machine.
  2. Note the WWPN of the HBA that will be replaced.
  3. Go to the V7000s in the High Aavailability(HA) group and make note which host ports they are and how many will need to be changed.

How do I rescan HBA in Linux?

To online scan new LUNs, complete the following steps:

  1. Update the HBA driver by installing or updating the files sg3_utils-*. …
  2. Ensure that DMMP is enabled.
  3. Ensure that the LUNS that need to be expanded are not mounted and are not used by applications.
  4. Run sh rescan-scsi-bus.sh -r .
  5. Run multipath -F .
  6. Run multipath .

How do I find the HBA driver version in Linux?

Question : How To Check FC Brocade HBA Firmware in linux? Answer : You can use the “systool” command or else the file “/sys/class/scsi_host/host0/firmware_version” to check the firmware version of your Brocade FC HBA.

How do I check my WWN?

Finding a WWN on a Windows host

  1. Verify that the Fibre Channel adapters and device drivers are installed.
  2. Log on to the Windows host with administrator access.
  3. Go to the LightPulse Utility to open the LightPulse Utility window. …
  4. On the LightPulse Utility window, verify that any installed adapters appear in the tree.

How do I update Emulex firmware?

Instructions

  1. Open XenServer command line interface and run the following command: …
  2. Copy the Port WWN numbers for all the HBA ports to a notepad.
  3. Download the corresponding . …
  4. Place the . …
  5. Install the HBA firmware update on each HBA port: …
  6. Repeat Step 5 for all HBA port WWN numbers.
  7. Restart the XenServer.
Like this post? Please share to your friends:
OS Today