Restart the computer, and press the F2 or Del key to get into the BIOS. Then go to Advanced Section, and look for the memory option. It is commonly marked as Caching or Shadowing. Please turn it off, and restart the computer.
How do I disable BIOS memory options such as Caching or shadowing in Windows XP?
Disabling Memory Options
- Go to the “Advanced” page. Select Advanced at the top of the screen by pressing the → arrow key, then press ↵ Enter . …
- Look for the memory option you want to disable. …
- Select a memory item you want to disabled. …
- Press the “Change” key. …
- Press the Esc key. …
- Press ↵ Enter when prompted.
How do I turn off BIOS?
Access the BIOS and look for anything that refers to turning on, on/off, or showing the splash screen (the wording differs by BIOS version). Set the option to disabled or enabled, whichever is opposite of how it is currently set.
How do I disable RAM without removing it?
1 Answer. There is no way to do this without physically removing the ram (after PC is powered down). The reason that it is not possible is because the RAM is always being constantly updated and used. If you have two sticks of ram, they are both being used.
How do I change my BIOS memory settings?
Look for the “Settings” or “Hardware” menu and click on it. Review the amount of RAM listed in the computer’s BIOS. Make sure that the amount of memory reflects your recent upgrade. Press the appropriate key to save the BIOS settings and exit.
How do I disable BIOS memory option?
Select Advanced at the top of the screen by pressing the → arrow key, then press ↵ Enter . This will open the Advanced page of the BIOS. Look for the memory option you want to disable.
Can you disable a hard drive in BIOS?
Highlight the drive using the arrow keys to navigate and press “Enter” to get a listing of options for it. Highlight “Disabled” or “None” using the arrow keys and press “Enter.”
How do I reset my BIOS to default?
Reset the BIOS to Default Settings (BIOS)
- Access the BIOS Setup utility. See Accessing BIOS.
- Press the F9 key to automatically load the factory default settings. …
- Confirm the changes by highlighting OK, then press Enter. …
- To save the changes and exit the BIOS Setup utility, press the F10 key.
Can you disable RAM slot?
No, even if you could disable a ram slot it will be still a jumper/switch on the motherboard so you still need to open the case. Best you can do is open the case and remove the ram if that ram is not soldered on the motherboard, if it is then you have to go to warranty.
Can I remove 1 stick of RAM?
Welcome to the forums! No, nothing in the BIOS needs to be changed when you remove a stick of RAM. It may be more beneficial to begin by testing both sticks with Memtest. If you get any errors during testing, then would be the time to test the sticks individually.
How do I check memory in BIOS?
Perform a Memory test
Press the Power button to start the computer and repeatedly press the f10 key to enter the BIOS setup window. Use the Left Arrow and Right Arrow keys to select Diagnostics. Use the Down Arrow and Up Arrow keys to select the Memory Test, and then press the enter key to begin the test.
How do I fix usable RAM in BIOS?
To fix this, follow these steps:
- Click Start , type msconfig in the Search programs and files box, and then click msconfig in the Programs list.
- In the System Configuration window, click Advanced options on the Boot tab.
- Click to clear the Maximum memory check box, and then click OK.
- Restart the computer.
Is XMP safe?
XMP is safe. Enable it. Performance will be impacted. Depends on you, if you are able to notice it.